Ball Valve

●Pneumatic butterfly type ball valve with C-TOP can be installed in pipeline and equipment with process controller, such as food, beverages, wine, dairy products, pharmaceutical and other high technology requirements of the pipeline.

Design Features
●Size：1"-4",DN25-DN100
●Material ：304/1.4301，316L/1.4404
●Max. temperature：-30℃ - 130℃
●Max. pressure: Vacuum to 10bar
●Small torquemoment
●Excretable(Washable CIP) (option)
●Handle can be installed on the side of the valve body, no matter what the flow direction is.
●Valve body can be replaced in any connections. And the length will not change.
Control Unit
●Control unit：DC 24V±10%
●Single-acting (standard), double acting (option)
●Self-adjusting valves feature feedback
●Supports analog signal (4-20mA) & amp; electrical signal (DC24V) Output
●Support AS-I BUS bus
●Supports manual and automatic operation

●Pneumatic butterfly type ball valve can be installed in pipeline and equipment with process controller, such as food, beverages, wine, dairy products, pharmaceutical and other high technology requirements of the pipeline.
Design Features
●Size：1"-4",DN25-DN100
●Material ：304/1.4301，316L/1.4404
●Max. temperature：-30℃ - 130℃
●Max. pressure: Vacuum to 10bar
●Small torquemoment
●Excretable(Washable CIP) (option)
●Handle can be installed on the side of the valve body, no matter what the flow direction is.
●Valve body can be replaced in any connections. And the length will not change.

Electric non-retention ball valve is mainly used in the processing and beverage, wine, oil refining, cosmetics and chemical industries.
●Body Structure: straight way,3 way
●Size：1"-4",DN25-DN100
●Temperature：-20℃ - 120℃
●Pressure：10-bar
●Material：AISI 304 316L
●Certificate：PED，97/23EC

Proportional regulating ball valve, with a variety of structures, such as 3way, straight way, butterfly design, no dead angle design, can be applied to work in high requirements of clean environment, such as pharmaceutical, food and beverage, wine, chemical industry etc. The ball valve meets operating temperature up to 150℃, pressure up to 10bar, innersurface roughness Ra0.5 μ m and 3A standards and ASME BPE high purity
requirements
Signal Input：0/4-20mA，0-5/10V
Signal feedback output：0/4-20mA，0-5/10V
Supports bus：DEVICE NET BUS
Support manual operation
Single key self-tuning function
Power Supply：DC 24V ±10%
Size： 1/2"-4",DN10-DN100
Temperature：-30 ℃-150℃
Pressure：10bar
Material：304/1.4301,316L/1.4404
Surface：Ra≤0.5μm
Gaskets:FDA 177.1550
Connection : Clamp, weld, thread,DIN，SMS，ISO，IDF，BPE，RJT
No matter what the connection mode is, the valve body can be replaced
Certificate：3-A-68-00，PED/97/23/EC

Non-retention ball valve is full inclusive ball seat design that solves the problem of the liquid holdup of the valve cavity, the ball valve is suitable for bio pharmaceutical engineering.
Stem seal in patented design and spring in compensation type design, have advantage of long life, low torque, long-term use of high temperature 150 ℃

Size：1"-4",DN25-DN100
Material：1.4301/304,316L/1.4404
Gasket：PTFE,TFM(FDA 177.1550)
Max. temperature：-20℃ - 150℃(Standard)-30℃ - 200℃(Option)
Pressure:10-30bar(Depending on seal material and temperature)
Manual, pneumatic, electric Exchange
●Without professional tools that disassembling the valve
●Small operating torque
●Gaskets:FDA 177.2600
●Connection : Clamp, weld, thread,DIN、SMS、ISO、IDF、BPE、RJT
●No matter what the connection mode is, the valve body can be replaced and the total length won't chang
Certificate：3-A-68-00，PED/97/23/EC

No retention ball valve is an all-inclusive ball seat design that solves the problem of the ball valve liquid retention valve cavity. This ball valve is suitable for biopharmaceutical engineering.
Patented stem seal design, spring-compensated design, long life, low torque, long-term high temperature 150 °C.

Specifications: 1/2"-4", DN10-DN100
Temperature: -30 to 150 ° C
Pressure: 10bar
Material: 304/1.4301, 316L/1.4404
Surface: Ra≤0.5μm
Manual, pneumatic, electric interchange
Disassemble the valve dimension without disassembling the pipe
Low steering torque
Washers according to FDA 177.1550
Connection: clamp, welding, thread, DIN, SMS, ISO, IDF, BPE, RJT
The valve body can be replaced regardless of the connection method.
Certification: 3-A-68-00, PED/97/23/EC

Appearance & internal non-retaining ball valve is an all-inclusive ball seat design that solves the problem of the ball valve liquid retention valve cavity. The ball valve is suitable for biopharmaceutical engineering.
Patented stem seal design, spring-compensated design, long life, low torque, long-term high temperature 150 °C.
Specifications: 1/2"-4", DN10-DN100
Temperature: -30 to 150 ° C
Pressure: 10bar
Material: 304/1.4301, 316L/1.4404
Surface: Ra≤0.5μm
Manual, pneumatic, electric interchange
Disassemble the valve dimension without disassembling the pipe
Low steering torque
Washers according to FDA 177.1550
Connection: clamp, welding, thread, DIN, SMS, ISO, IDF, BPE, RJT
The valve body can be replaced regardless of the connection method.
Certification: 3-A-68-00, PED/97/23/EC

Electric ball valve is mainly used in the processing of beverages, wine, oil, cosmetics and chemical industry.
●Body Structure: straight, 3 way
●Size：1"-4",DN25-DN100
●Temperature：-20℃ - 120℃
●Pressure：10-bar
●Material：AISI 304 316L
●Certificate：PED，97/23EC

◎ Standard switching type (B-type) makes valves open and close operations by switching circuit, meanwhile outputs a group of active contacts signal to indicate that valve is fully open or fully closed.
◎ Smart regulating type (A-type) realizes intelligent regulation and control through receiving a standard output signal 4-20mA.DC, 0-10V.DC or 1-5V.DC from computer or industrial instrument as well as outputs 4-20mA.DC
standard feedback signal.
◎ Torque from 6N.M to 2000N.M
◎ Operating time from 7s to 100S
Size: 1 "-4", DN25-DN100
Material: 304 / 316L
Pressure: 10bar
Temperature: -30 to 150 ℃

Horizontal pneumatic straight ball valve, Both manually and automatically operated ball valveare mainly used in processing beverages, wine, oil refining, cosmetics and chemical industries.

●Size：1"-4",DN25-DN100
●Temperature：-20℃ - 120℃
●Pressure：10-bar
●Material：AISI 304 316L
●Gaskets:PTFE FDA 177.1550
●No matter what kind of liquid flow is, the handle can be mounted on the side of the valve body
●Whatever the connection is, it does not change the total length of the valve
●Connection : Clamp, weld, thread,flange,DIN、SMS、RJT、FIL
●Material contact partsAISI 304/316L
●Other parts AISI 304
●Certificate：PED，97/23EC

Ball valve with thermal insulation jacket, both manually or automatically operated valve are mainly used in processing beverages, wine, oil refining, cosmetics and chemical industries.

Thermal insulation ball valve, the valve housing is designed with a jacket in order to achieve optimum heat transfer. It can protect the easy solidification sensitive medium from solidation, such as chocolate, margarine or similar media.

●Size：1"-4",DN25-DN100
●Temperature：-20℃ - 120℃
●Pressure：10-bar
●Material：AISI 304 316L
●Gaskets:PTFE FDA 177.1550
●No matter what kind of liquid flow is, the handle can be mounted on the side of the valve body
●Whatever the connection is, it does not change the total length of the valve
●Connection : Clamp, weld, thread,flange,DIN、SMS、RJT、FIL
●Material contact parts AISI 304/316L
●Other parts AISI 304
●Certificate：PED，97/23EC

Pneumatic ball valve with C TOP, Both manually and automatically operated valve are mainly used in processing beverages, wine, oil refining, cosmetics and chemical industries.

●Size：1"-4",DN25-DN100
●Temperature：-20℃ - 120℃
●Pressure：10-bar
●Material：AISI 304 316L
●Gaskets:PTFE FDA 177.1550
●No matter what kind of liquid flow is, the handle can be mounted on the side of the valve body
●Whatever the connection is, it does not change the total length of the valve
●Connection : Clamp, weld, thread,flange,DIN、SMS、RJT、FIL
●Material contact partsAISI，304/316L
●Other parts AISI 304
●Certificate：PED，97/23EC

Regulating type ball valve is divided into two way, three way, tank bottom ball valve and so on, flow control device is design for dairy,food processing industry, beverage manufacturing, pharmaceutical and fine chemical industry. The most important application is pressure control, flow control, liquid level, etc.
● Pneumatic regulating type ball valve controlled by positioner to achieve flow control (PD) may also adopt self position and flow adjustment (PID) by intelligent process controller.
● Size: 1 "-4", DN25-DN100
● Material: 304 / 1.4301,316L / 1.4404
● Maximum temperature: -30 to 150 ℃
● Maximum pressure: vacuum to 10bar
● 0/4 ... 20mA to 0 ... 5 / 10V (basic type)
● 0/4 ... 20mA position feedback output (option)
● Device NET bus control (option)
● Single action / double action (option)
● Connection: clamp, thread, weld, flange, DIN SMS RJT ISO
● Certificate: 3-A-68-00, FDA 177.1550, PED / 97/23 / EC