Biopharmaceutical

Multi port Diaphragm Valve M-32B
2 control valve, 3 ports
Suggest S1 up installation
Dead zone = ≤ 1D
Size: 1"-2", DN25-DN50
Material: 316L/1.4404, 1.4435 NB2 Fe＜0.5%
Temperature: -20℃ +150℃
Pressure: 10bar
Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
Operations: Manual/Pneumatic
Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor

Multi port Diaphragm Valve M-44A
4 control valves, 4 ports
S2 and S4 horizontal installation
S1 and S3 vertical installation
Non-directional import and outport
Dead zone = ≤ 1D
Size: 1"-2", DN25-DN50
Material: 316L/1.4404, 1.4435 NB2 Fe＜0.5%
Temperature: -20℃ +150℃
Pressure: 10bar
Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
Operations: Manual/Pneumatic
Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor

Multi port Diaphragm Valve M-65A is the most progressive design for meeting high clean in pharmacy industry. Assembly of traditional welding manifold valve systerm is complicated, implementation of period is long, large space is ooccupied with expensive cost on inspection.

5 control valves, 6 ports
5 valves vertical place
Dead zone = ≤ 1D
Size: 1"-2",DN25-DN50
Material: 316L/1.4404，1.4435 NB2 Fe＜0.5%
Temperature: -20℃ +150℃
Pressure: 10bar
Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
Operations: Manual/Pneumatic
Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor

Multi port Diaphragm Valve M-62A
2 control valves, 6 ports
Dead zone = ≤ 1D
Size: 1"-2", DN25-DN50
Material: 316L/1.4404，1.4435 NB2 Fe＜0.5%
Temperature: -20℃ +150℃
Pressure: 10bar
Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
Operations: Manual/Pneumatic
Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor

Multi port Diaphragm Valve M-32E
2 control valves, 3 ports
Dead zone = ≤ 1D
Size: 1"-2",DN25-DN50
Material: 316L/1.4404, 1.4435 NB2 Fe＜0.5%
Temperature: -20℃ +150℃
Pressure: 10bar
Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
Operations: Manual/Pneumatic
Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor

Multi port Diaphragm Valve-M-32A
2 control valves, 3 ports
Three-way reversing valve
S1 suggested up installation
Dead zone = ≤ 1D
Size: 1"-2",DN25-DN50
Material: 316L/1.4404, 1.4435 NB2 Fe＜0.5%
Temperature: -20℃ +150℃
Pressure: 10bar
Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
Operations: Manual/Pneumatic
Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor

Multi port Diaphragm Valve M-32H
2 control valves, 3 ports
Dead zone = ≤ 1D
Size: 1"-2", DN25-DN50
Material: 316L/1.4404, 1.4435 NB2 Fe＜0.5%
Temperature: -20℃ +150℃
Pressure: 10bar
Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
Operations: Manual/Pneumatic
Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor

Multi-channel bottom diaphragm valve MG-32B
2 control valves, 3 ports
A water point valve seat
Dead zone = ≤ 1D
Size: 1"-2", DN25-DN50
Material: 316L/1.4404，1.4435 NB2 Fe＜0.5%
Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
Operations: Manual/Pneumatic
Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor

Multi port Diaphragm Valve M-53A
3 control valves, 5 ports
A water point valve seat
Two integrated closed-loop sampling valve seats
Suggest S1 up installation
Dead zone = ≤ 1D
Size: 1"-2", DN25-DN50
Material: 316L/1.4404, 1.4435 NB2 Fe＜0.5%
Temperature: -20℃ +150℃
Pressure: 10bar
Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
Operations: Manual/Pneumatic
Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor

Mini Three way Diaphragm Valve
●Size: 1/4 "-3/4", DN6-DN15
●Standard: BPE 3A DIN ISO IDF
●Certificate: PED/97/23/EC, 3A/54-04/1580, FDA.177.2600
●Max Temperature: -30℃ to 150℃ (Depending on seal material)(Stainless steel actuator)
●Max Temperature: -30℃ to 130℃ (Depending on seal material)(Plastic actuator)
●Max Pressure: One way (DELTA P=100%)
EPDM8 bar, PTFE 6 bar(Option)
EPDM6 bar, PTFE 4.5 bar(Option)
Double action EPDM 8 bar, PTFE 6 bar
●Assembling different actuators can meet higher pressure rating
●Forged Body: 1.4404/316L/1.4435 BN2
●Cast Body: 1.4404/316L
●Connection: Clamp, Weld, Thread, Flange
●Operations: Manual and pneumatic

U-type Three way Mini Diaphragm Valve
●Size: 1/4"-3/4", DN6-DN15
●Standard: BPE 3A DIN ISO IDF
●Certificate: PED/97/23/EC，3A/54-04/1580，FDA.177.2600
●Max Temperature: -30℃ to 150℃ (Depending on seal material)(Stainless steel actuator)
●Max Temperature: -30℃ to 130℃ (Depending on seal material)(Plastic actuator)
●Max Pressure: One way (DELTA P=100%)
EPDM8bar, PTFE 6 bar(Option)
EPDM6bar, PTFE 4.5 bar(Option)
Double action EPDM 8bar, PTFE 6bar
●Assembling different actuators can meet higher pressure rating.
●Forged Body: 1.4404/316L/1.4435 BN2
●Cast Body: 1.4404/316L
●Connection : Clamp, Weld, Thread, Flange
●Operations: Manual and pneumati

Mini Multiport Diaphragm Valve is mainly used in liquid sampling, biological systems, laboratories and other projects. Valves have a dead zone = ≤3D
●Size: 1/4"-3/4", DN6-DN15
●Standard: BPE 3A DIN ISO IDF
●Certificate: PED/97/23/EC，3A/54-04/1580，FDA.177.2600
●Certificate: PED/97/23/EC，3A/54-04/1580，FDA.177.2600
●Max Temperature: -30℃ to 150℃ (Depending on seal material)(Stainless steel actuator)
●Max Temperature: -30℃ to 130℃ (Depending on seal material)(Plastic actuator)
●Max Pressure: One way (DELTA P=100%)
EPDM8 bar,PTFE 6 bar(Option)
EPDM6 bar, PTFE 4.5 bar(Option)
Double action EPDM 8 bar, PTFE 6 bar
●Assembling different actuators can meet higher pressure rating.
●Forged Body: 1.4404/316L/1.4435 BN2
●Cast Body: 1.4404/316L
●Connection: Clamp, Weld, Thread, Flange
●Operations: Manual and pneumatic

Pneumatic Diaphragm Valve with Control Unit
◎ Size: 1"-4", DN25-DN100
◎ Pressure: 10bar (145 PSI)
◎ Material: ASTM 316L, 1.4404,1.4435 NB2 Fe <0.5%
◎ Temperature: -20 ℃ + 150 ℃ (EPDM) -4 ℉ + 302 ℉ (+ 140 ℃ (SIP, 30) 284 ℉)
◎ Connection: Clamp, Weld, Thread, 3A BPE DIN SMS IDF ISO
◎ valve body structure: straight, tee, U-tee, tank bottom valve, multi-channel diaphragm
◎ Diaphragm Material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Viton)
◎ Certificate: 3A-54-02 / 1580, PED 97/23 EC, FDA177.2600
Mini C-TOP is a section control unit, connecting with PLC to achieve automation control.
The valve opens - green light
The valve closes - red light
Design with dynamic button (manual design)
Power Supply: DC 24 V ±10%
Source: M5 / Φ 4

Electric regulating Diaphragm Valve has torque, stroke, self adaptive function, freely adjusting the direction of opening and closing.
Power: DC24V / AC110V / 220V
Executive Functions:
Switch Type: input and output signals feedback
Adjustment Type: signal input 0-10V, feedback 2-10V
Self-adaptive Valve Setting
Support for manual operation
Support body sensors or objects sensors, activate valve to open or close
Stroke Time: ON to OFF = 90S, 150S
Size: 1"-4", DN25-DN100
Material: ASME BPE 316L, 1.4404,1.4435 NB2 Fe <0.5%

◎ Standard switching type (B-type) makes valves open and close operations by switching circuit, meanwhile outputs a group of active contacts signal to indicate that valve is fully open or fully closed.
◎ Smart regulating type (A-type) realizes intelligent regulation and control through receiving a standard output signal 4-20mA.DC, 0-10V.DC or 1-5V.DC from computer or industrial instrument as well as outputs 4-20mA.DC standard feedback signal.
◎ Operating time from 7s to 100S
Size:1"-8",DN25-DN200
Material: 304 / 316L
Pressure: 10bar
Temperature: -30 to 130 ℃
Connection: clamp, thread, weld, three-piece flange
Standards: DIN SMS ISO IDF RJT

◎ Standard switching type (B-type) makes valves open and close operations by switching circuit, meanwhile outputs a group of active contacts signal to indicate that valve is fully open or fully closed.
◎ Smart regulating type (A-type) realizes intelligent regulation and control through receiving a standard output signal 4-20mA.DC, 0-10V.DC or 1-5V.DC from computer or industrial instrument as well as outputs 4-20mA.DC
standard feedback signal.
◎ Torque from 6N.M to 2000N.M
◎ Operating time from 7s to 100S
Size: 1 "-4", DN25-DN100
Material: 304 / 316L
Pressure: 10bar
Temperature: -30 to 150 ℃

Electric regulating divert seat valve has torque, stroke, self adaptive function. It freely adjusts the opening and closing direction,It is used in a variety of automatic control systems.
Electric divert seat valve divided into two designs: 1) electric regulating divert seat valve; 2) electric switching divert seat valve.

Power: AC 100V / 220V, DC 24V
Modulating: 0-10V input and output
Stroke time: ON to OFF = 90S, 150S
Size: 1 "-DN20 .... 4" -DN100
Material: 316L, 304
Pressure: Vacuum -10bar
Temperature: 130 ℃

● This electric diaphragm regulating valve is a kind of electric sanitary diaphragm valves which is widely used in the food processing industry, beverage production, pharmaceuticals and fine chemical industry.
● Adjust the position of the valve core to regulate the flow by adjusting the analog signal 0 ... 10V input.

The actuator is a straight-stroke, intelligent electric actuator with PID control algorithm that automatically returns to a set safe position in the event of a power failure. At the same time, it has an optical sensor to detect the human body or object sensing to realize the valve opening and closing function.
◆LCD display Chinese and English menu
◆One-button self-tuning
◆Support manual operation
◆Input 0/4-20mA
◆Output 0/4-20mA
◆Bus communication mode bus rs485
◆Automatic reset to safe position when power is off
◆ Human body induction automatic opening and closing function
◆Power supply DC24V±10%

Regulating Globe valve is mainly used in the flow control valve. The valves only has stainless steel and PTFE in contact with media with maximum temperature up to 180 ℃, pressure up to 20bar, can be used in a vacuum environment. Body is designed according to no dead angle with the surface roughness up to Ra0.4μm. Valve seal adopts embedded design which is widely used in all industries, such as pharmaceutical, food and beverage, brewing, chemical and other industries . This valve is particularly suitable for steam flow regulating control systems.
● Pneumatic regulating valve, controlled by positioner to achieve flow control (PD) may also adopt self position and flow adjustment (PID) by intelligent process controller.
● Size: 1 "-4", DN25-DN100
● Material: 304 / 1.4301,316L / 1.4404
● Maximum temperature: -30 to 150 ℃
● Maximum pressure: vacuum to 10bar

Regulating angle seat valve is mainly used in the flow control valve. The valves have only stainless steel and PTFE in contact with media with maximum temperature up to 180 ℃, pressure up to 20bar, and can be used in a vacuum environment. Body is designed according to no dead angle with the surface roughness up to Ra0.4μm. Valve seal adopts embedded design, which is widely used in all industries, such as pharmaceutical, food and beverage, brewing, chemical and other industries . This valve is particularly suitable for steam flow regulating control systems.
● Pneumatic regulating valve, controlled by positioner to achieve flow control (PD) may also adopt self position and flow adjustment (PID) by intelligent process controller.
● Size: 1 "-4", DN25-DN100
● Materials: 304 / 1.4301,316L / 1.4404
● Maximum temperature: -30 to 150 ℃
● Maximum pressure: vacuum to 10bar

Regulating type ball valve is divided into two way, three way, tank bottom ball valve and so on, flow control device is design for dairy,food processing industry, beverage manufacturing, pharmaceutical and fine chemical industry. The most important application is pressure control, flow control, liquid level, etc.
● Pneumatic regulating type ball valve controlled by positioner to achieve flow control (PD) may also adopt self position and flow adjustment (PID) by intelligent process controller.
● Size: 1 "-4", DN25-DN100
● Material: 304 / 1.4301,316L / 1.4404
● Maximum temperature: -30 to 150 ℃
● Maximum pressure: vacuum to 10bar
● 0/4 ... 20mA to 0 ... 5 / 10V (basic type)
● 0/4 ... 20mA position feedback output (option)
● Device NET bus control (option)
● Single action / double action (option)
● Connection: clamp, thread, weld, flange, DIN SMS RJT ISO
● Certificate: 3-A-68-00, FDA 177.1550, PED / 97/23 / EC

Regulating butterfly valve is mainly used in the process control system, it achieves valve flow adjustment control and valve position feedback.

0/4 ... 20mA to 0 ... 5 / 10V (basic type)
0/4 ... 20mA position feedback output (option)
Device NET bus control (option)
Single action / double action (option)
Power: DC.24V
Size: DN25-DN300,1 "-12"
Maximum temperature: 130 ℃
Maximum pressure: 10bar
Material: ASTM T304 / T316L, 1.4301 / 1.4404
Certificate: PED-97/23 / EC; FDA177.2600

● Regulating valve is a pneumatic proportional valve, flow control device is design for dairy,food processing industry, beverage manufacturing, pharmaceutical and fine chemical industry. The most important application is pressure control, flow control, liquid level and so on.
● Pneumatic control valve controlled by positioner to achieve flow control (PD) may also adopt self position and flow adjustment (PID) by intelligent process controller.
● input signal, 0 / 4-20mA, 0-5 / 10V.
● output signal, 0 / 4-20mA, 0-5 / 10V.
● 1) equal percentage valve core, 2) parabolic valve core, 3) taper valve core, 4) quick-opening valve core
● Material: 304,316L
● Temperature: -10 ℃ to 130 ℃
● Pressure: 10bar
● Air supply: 4-7bar
● Power: DC 24V ± 10%
● Certificate: 3-A-53-06; PED-97/23 / EC; FDA177.2600