Cotroller / control unit / C-TOP, including signal transmission and LED position indicating light, is used for controlling process valve of all kinds. Information collection is come from PLC or other automatic control equipment which could turn the valve on & off and reflect position of the valve simultaneously.
|
Power supply |
DC24V +/-10% |
|
Input signal setting |
0/4 to 20mA and 0 to 5/10V |
|
Output signal and resistance |
0/4 to 20mA 180Ω |
|
|
0 to 5/10V 180Ω |
|
Sensor input |
0/4 to 20mA (180Ω input resistance) |
|
|
frequency 0 to 1000Hz (17kΩ input resistance) |
|
|
PT100 -20 to +220℃ (resolution < 0.1℃) |
|
Ambient temperature |
0 to +55℃ |
|
Pilot air ports |
Hose size φ6-8mm threaded ports G1/8 |
|
Supply pressure |
Low air flow rate 0 to 7bar |
|
|
High air flow rate 3 to 7bar |
|
Air input filter |
Exchangeable (mesh aperture ~ 0.1mm) |
|
Actuator |
Suitable for 70mm, 86mm, 114mm, 130mm, 168mm |
|
Stroke range valve spindle |
3 to 60mm (3 to 60mm on request) |
|
Pretection class |
IP65/67 according to EN 60529 (NEMA4xin preparation) |
|
Power consumption |
< 2W |
|
Electrical connection |
|
|
1) Multipole connection |
M12X1, 8-pins or 5-pins |
|
2) Cable gland |
M16X1, 5 (φ 5-8mm) on terminal screws (1,5mm2) |
|
Bus communication |
MODE BUS RS485 |
Below vedio shows how to assemble the Cotroller / control unit / C-TOP to valves.
