Food

TECHNICAL SPECIFICATIONS:
Single key automatic setting
Valve anti-leakage function
Valve fault feedback function
Different valve positions display different colors of LED lights
Signal feedback:

TECHNICAL SPECIFICATIONS:
Single key automatic setting
Different valve positions display different colors of LED lights
High and low color can be set on site
Bus communication: IO-Link; The AS - I

Exd flameproof series-Valve Control unit-C-TOP-22A62

TECHNICAL SPECIFICATIONS:
Single key automatic setting
Valve anti-leakage function
Valve fault feedback function
Different valve positions display different colors of LED lights
Signal feedback:

C-TOP-21A21 is a Ex d explosion-proof valve control unit. It receives instructions from PLC/DCS or other automatic control systems to work, and feedback the current valve position signal to PLC/DCS and other automatic control systems. It can also communicate through IO-Link and AS-I V3.0 version bus. Each location will display its current status through a different location color LED light.

C-TOP-2211 is a intrinsically safe explosion-proof design of the valve control unit, it receives from PLC/DCS or other automatic control system instructions to work, at the same time feedback the current valve position signal to PLC/DCS and other automatic control system, but also through the IO-Link, AS-I V3.0 version of the bus communication. Each location will display its current status through a different location color LED light.

IL-TOP-21A41/21A42 is a Ex d explosionproof valve positioner. It receives instructions from PLC/DCS or other automatic control systems, such as 0/4-20mA, 0-5V/10V, and feeds back the current valve position signal to PLC/DCS and other automatic control systems. It can also communicate through IO-Link or MOD BUS RS485 version bus.

The IL-TOP-21A31/21A32 is a flameproof design valve positioner. It receives instructions from PLC/DCS or other automatic control systems, such as 0/4-20mA, 0-5V/10V to work, at the same time feedback the current valve position signal to PLC/DCS and other automatic control systems. It can also communicate through IO-Link or MOD BUS RS485 version bus.

The IL-TOP-2231/2232 is an intrinsic safety design valve positioner. It receives instructions from PLC/DCS or other automatic control systems, such as 0/4-20mA, 0-5V/10V to work, at the same time feedback the current valve position signal to PLC/DCS and other automatic control systems. It can also communicate through IO-Link or MOD BUS RS485 version bus.

The IL-TOP-2201/2202 is an intrinsic safety flameproof design valve positioner. It receives instructions from PLC/DCS or other automatic control systems, such as 0/4-20mA, 0-5V/10V to work, at the same time feedback the current valve position signal to PLC/DCS and other automatic control systems. It can also communicate through IO-Link or MOD BUS RS485 version bus.

The most significant advantage is that it can be cleaned and sterilized by the online original CIP. This technical characteristics can completely clean and disinfect the valve without disassembly. This not only greatly reduces the risk of maintenance costs and production interruptions, but also ensures the hygiene and safety of the production environment, and effectively prevents bacterial breeding and cross -pollution.

AC220V/110V, DC24V
On-off type: active signal, passive signal
Regulating type: 4-20mA
Size: DN10-DN150, 1/2"-6"
Material: 304/1.4301, 316L/1.4404, ASME BPE 316L 1.4435 NB2 Fe≤0.5% 
Standard: DIN SMS ISO IDF RJT BS4825 ASME BPE 3A DIN11864 DIN11853
Connection: thread, clamp, flange, weld 
Drive mode: Film-type pneumatic actuator
Pressure: vacuum to 10bar (1.0Mpa)
Temperature: max 140℃
Seal material: EPDM SILICON FKM FFKM HNBR FVMQ NBR
Certificattion: FDA177.2600; Glass II USP Glass VI Chapter 88; GB4806.11; EG VO/1935-2004; PED/97/23/EC

Multi-port single seat valve has a multi-functional combination application, can add product on the process pipeline, main valve CIP cleaning and SIP sterlization, the lowest point liquid self-emptying and other functional applications.

PTFE diaphragm isolate the valve from outside circumstance completely
Size: DN10-DN150, 1/2"-6"
Material: 304/1.4301, 316L/1.4404, ASME BPE 316L 1.4435 NB2 Fe≤0.5% 
Standard: DIN SMS ISO IDF RJT BS4825 ASME BPE 3A DIN11864 DIN11853
Connection: thread, clamp, flange, weld 
Drive mode: Film-type pneumatic actuator
Pressure: vacuum to 10bar (1.0Mpa)
Temperature: max 140℃
Seal material: EPDM SILICON FKM FFKM HNBR FVMQ NBR
Certificattion: FDA177.2600; Glass II USP Glass VI Chapter 88; GB4806.11; EG VO/1935-2004; PED/97/23/EC

Film-type single seat valve can bear higher pressure ≤ 30, shorter height, stainless steel
Technical Specifications
Size: DN10-DN150, 1/2"-6"
Material: 304/1.4301, 316L/1.4404, ASME BP

The vent valve is a reliable automatic venting valve that removes air as needed and is mounted vertically on top of the pipe or vessel.
The following is an example of the use of an exhaust valve:
Shown 1: Due to material or process requirements, the canisters form cavitation and therefore require air to be
vented. In this case, the valve is mounted on the top of the container.
●Specifications: 1"-12", DN25-DN200
●Material: ASTM 304/1.4301, 316L1.4404
● Washer: EPDM FPM
● Pressure: 10bar
● Temperature: -10 ° C to 130 ° C

The DJ-D71BV is a clip-on centerline butterfly valve. The valve body consists of a ring-shaped seat, an elastic lining and a disc. The disc is rotated 90° through the valve shaft into the washer to control the fluid. Depending on the model and size, working pressures up to 25 bar and media temperatures up to 210 °C are possible. In most cases, these valves are used to control pure liquids, but can also be used for other media such as gases through special selection. Due to the wide variety of materials, butterfly valves are widely used in industries such as chemical and water treatment. Butterfly valves are also a very economical fluid solution in some process segments where the frequency of opening and closing, hygienic level and control accuracy are not critical. Butterfly valves are usually the only alternative for pipeline applications larger than DN 150. In the case of higher requirements for corrosion resistance or sanitary grade, a lined butterfly valve can be used. PFA-encapsulated discs for highly aggressive media in the chemical or semiconductor industry; polished stainless steel discs for use in the food or pharmaceutical industry.

Specifications SIZE: 1.5"-12", DN40-DN300
Material: valve body CF8 (304); valve plate CF3M (316L), CF8 (304), stainless steel + PFA
Pressure: PN10; PN16
Temperature: EPDM -20 ° C to +130 ° C, other materials refer to the following data table
Seal: EPDM SILICON FKM HNBR NBR PTFE TFM
Connection method: clip type, lug type
Drive mode: manual, pneumatic, electric

The DJ-D71BV is a clip-on centerline butterfly valve. The valve body consists of a ring-shaped seat, an elastic lining and a disc. The disc is rotated 90° through the valve shaft into the washer to control the fluid. Depending on the model and size, working pressures up to 25 bar and media temperatures up to 210 °C are possible. In most cases, these valves are used to control pure liquids, but can also be used for other media such as gases through special selection. Due to the wide variety of materials, butterfly valves are widely used in industries such as chemical and water treatment. Butterfly valves are also a very economical fluid solution in some process segments where the frequency of opening and closing, hygienic level and control accuracy are not critical. Butterfly valves are usually the only alternative for pipeline applications larger than DN 150. In the case of higher requirements for corrosion resistance or sanitary grade, a lined butterfly valve can be used. PFA-encapsulated discs for highly aggressive media in the chemical or semiconductor industry; polished stainless steel discs for use in the food or pharmaceutical industry.

Specifications: 1.5"-12", DN40-DN300
Material: valve body CF8 (304); valve plate CF3M (316L), CF8 (304), stainless steel + PFA
Pressure: PN10; PN16
Temperature: EPDM -20 ° C to +130 ° C, other materials refer to the following data table
Seal: EPDM SILICON FKM HNBR NBR PTFE TFM
Connection method: clip type, lug type
Drive mode: manual, pneumatic, electric

DJ-FDT butterfly valve is mainly designed for powder, granule, capsule and other container equipment systems. The butterfly valve has the characteristics that standard butterfly valve does not have, such as ultra-small torque, seal opening and closing does not produce excessive friction, long life, No seal powder shedding, ultra-short valve body, and adjustable pressure. The valve does not require professional tools to be disassembled, maintained, cleaned, safe, reliable, low cost, simple to operate, and can be interchanged manually, pneumatically, or electrically.
Specifications: 4''-10'', DN100-DN250
Connection method: clamp, welding, flange, bottom flange, DIN 3A INCH
Material: 316L/1.4404/1.4435
Seal: White SILCON (recommended) Gray FKM (selection)
Execution mode: manual, pneumatic, electric interchangeable
Surface treatment: Ra 0.6μm (recommended); Ra 0.4μm (selection)
External surface: matt (recommended) bright blasting electropolishing
Applicable: vacuum, high temperature 130 ° C, CIP cleaning, SIP sterilization, etc.

DJ-FDT butterfly valve is mainly designed for powder, granule, capsule and other container equipment systems. The butterfly valve has the characteristics that standard butterfly valve does not have, such as ultra-small torque, seal opening and closing does not produce excessive friction, long life, No seal powder shedding, ultra-short valve body, and adjustable pressure. The valve does not require professional tools to be disassembled, maintained,
cleaned, safe, reliable, low cost, simple to operate, and can be interchanged manually, pneumatically, or electrically.
Specifications: 4''-10'', DN100-DN250
Connection method: clamp, welding, flange, bottom flange, DIN 3A INCH
Material: 316L/1.4404/1.4435
Seal: White SILCON (recommended) Gray FKM (selection)
Execution mode: manual, pneumatic, electric interchangeable
Surface treatment: Ra 0.6μm (recommended); Ra 0.4μm (selection)
External surface: matt (recommended) bright blasting electropolishing
Applicable: vacuum, high temperature 130 ° C, CIP cleaning, SIP sterilization, etc.

Proportional pneumatic cut-off regulating valve is used in dairy, food, beverage production, bio-pharmaceutical, fine chemical, water treatment, new energy and other industries. The valve controls various fluid flows, temperatures, pressures, and so on.

Proportional pneumatic adjustment butterfly valve is used in dairy, food, beverage production, bio-pharmaceutical, fine chemical, water treatment, new energy and other industries. The valve controls various fluid flows, temperatures, pressures and so on.
Input signal: 0/4-20mA
Bus communication: MODE BUS RS485
Input signal: 0/4-20mA, 0-5/10V (optional)
Output signal: 0/4-20mA, 0-5/10V (optional)
Display: OLED Chinese menu
Material: 304/1.4301, 316L/1.4404, 1.4435, 2205
Specification: 1/2"-12", DN10-DN300
Temperature: -20 ° C to 150 ° C
Pressure: vacuum -10bar
Air source pressure: 4-7bar
Power supply: DC 24V ±10%
Health certification: 3-A-53-06; PED-97/23/EC; FDA177.2600
Explosion-proof certification: II 2 G Ex ib IIC T6/T5/T4

Proportional pneumatic adjustment ball valve is used in dairy, food, beverage production, bio-pharmaceutical, fine chemical, water treatment, new energy and other industries. The valve controls various fluid flows, temperatures, pressures and so on
Input signal: 0/4-20mA
Bus communication: MODE BUS RS485
Input signal: 0/4-20mA, 0-5/10V (optional)
Output signal: 0/4-20mA, 0-5/10V (optional)
Display: OLED Chinese menu
Material: 304/1.4301, 316L/1.4404, 1.4435, 2205
Specification: 1/2"-6", DN10-DN150
Temperature: -20 ° C to 150 ° C
Pressure: vacuum -10bar
Air source pressure: 4-7bar
Power supply: DC 24V ±10%
Health certification: 3-A-53-06; PED-97/23/EC; FDA177.2600
Explosion-proof certification: II 2 G Ex ib IIC T6/T5/T4

Diaphragm type Pneumatic control valve is used in dairy, food, beverage production, bio-pharmaceutical, fine chemical, water treatment, new energy and other industries. The valve controls various fluid flows, temperatures, pressures and so on