Food

●The Electric butterfly ball valve can be installed in pipeline and equipment with process controller, such as food, beverages, wine, dairy products, pharmaceutical and other high technology requirements of the pipeline.

Design Features
●Size：1"-4",DN25-DN100
●Material ：304/1.4301，316L/1.4404
●Max. temperature：-30℃ - 130℃
●Max. pressure: Vacuum to 10bar
●Small torque moment
●Excretable(Washable CIP) (option)
●Handle can be installed on the side of the valve body, no matter what the flow direction is.
●Valve body can be replaced in any connections. And the length will not change.
Electric Actuator
Electric actuator: switch type, regulating type, passive contact
Power Supply：DC 24V AC 110V 220V
Opening and closing time：10/S-100/S
Torque：6N.M - 2000N.M
Protection grade: IP67
Explosion-proof: EX DII BT4 (option)

●Horizontal pneumatic butterfly ball valve can be installed in pipeline and equipment with process controller, such as food, beverages, wine, dairy products, pharmaceutical and other high technology requirements of the pipeline.
Design Features
●Size：1"-4",DN25-DN100
●Material ：304/1.4301，316L/1.4404
●Max. temperature：-30℃ - 130℃
●Max. pressure: Vacuum to 10bar
●Small torquemoment
●Excretable(Washable CIP) (option)
●Handle can be installed on the side of the valve body, no matter what the flow direction is.
●Valve body can be replaced in any connections. And the length will not change.

●Pneumatic butterfly type ball valve with C-TOP can be installed in pipeline and equipment with process controller, such as food, beverages, wine, dairy products, pharmaceutical and other high technology requirements of the pipeline.

Design Features
●Size：1"-4",DN25-DN100
●Material ：304/1.4301，316L/1.4404
●Max. temperature：-30℃ - 130℃
●Max. pressure: Vacuum to 10bar
●Small torquemoment
●Excretable(Washable CIP) (option)
●Handle can be installed on the side of the valve body, no matter what the flow direction is.
●Valve body can be replaced in any connections. And the length will not change.
Control Unit
●Control unit：DC 24V±10%
●Single-acting (standard), double acting (option)
●Self-adjusting valves feature feedback
●Supports analog signal (4-20mA) & amp; electrical signal (DC24V) Output
●Support AS-I BUS bus
●Supports manual and automatic operation

●Pneumatic butterfly type ball valve can be installed in pipeline and equipment with process controller, such as food, beverages, wine, dairy products, pharmaceutical and other high technology requirements of the pipeline.
Design Features
●Size：1"-4",DN25-DN100
●Material ：304/1.4301，316L/1.4404
●Max. temperature：-30℃ - 130℃
●Max. pressure: Vacuum to 10bar
●Small torquemoment
●Excretable(Washable CIP) (option)
●Handle can be installed on the side of the valve body, no matter what the flow direction is.
●Valve body can be replaced in any connections. And the length will not change.

Electric non-retention ball valve is mainly used in the processing and beverage, wine, oil refining, cosmetics and chemical industries.
●Body Structure: straight way,3 way
●Size：1"-4",DN25-DN100
●Temperature：-20℃ - 120℃
●Pressure：10-bar
●Material：AISI 304 316L
●Certificate：PED，97/23EC

Proportional regulating ball valve, with a variety of structures, such as 3way, straight way, butterfly design, no dead angle design, can be applied to work in high requirements of clean environment, such as pharmaceutical, food and beverage, wine, chemical industry etc. The ball valve meets operating temperature up to 150℃, pressure up to 10bar, innersurface roughness Ra0.5 μ m and 3A standards and ASME BPE high purity
requirements
Signal Input：0/4-20mA，0-5/10V
Signal feedback output：0/4-20mA，0-5/10V
Supports bus：DEVICE NET BUS
Support manual operation
Single key self-tuning function
Power Supply：DC 24V ±10%
Size： 1/2"-4",DN10-DN100
Temperature：-30 ℃-150℃
Pressure：10bar
Material：304/1.4301,316L/1.4404
Surface：Ra≤0.5μm
Gaskets:FDA 177.1550
Connection : Clamp, weld, thread,DIN，SMS，ISO，IDF，BPE，RJT
No matter what the connection mode is, the valve body can be replaced
Certificate：3-A-68-00，PED/97/23/EC

Non-retention ball valve is full inclusive ball seat design that solves the problem of the liquid holdup of the valve cavity, the ball valve is suitable for bio pharmaceutical engineering.
Stem seal in patented design and spring in compensation type design, have advantage of long life, low torque, long-term use of high temperature 150 ℃

Size：1"-4",DN25-DN100
Material：1.4301/304,316L/1.4404
Gasket：PTFE,TFM(FDA 177.1550)
Max. temperature：-20℃ - 150℃(Standard)-30℃ - 200℃(Option)
Pressure:10-30bar(Depending on seal material and temperature)
Manual, pneumatic, electric Exchange
●Without professional tools that disassembling the valve
●Small operating torque
●Gaskets:FDA 177.2600
●Connection : Clamp, weld, thread,DIN、SMS、ISO、IDF、BPE、RJT
●No matter what the connection mode is, the valve body can be replaced and the total length won't chang
Certificate：3-A-68-00，PED/97/23/EC

No retention ball valve is an all-inclusive ball seat design that solves the problem of the ball valve liquid retention valve cavity. This ball valve is suitable for biopharmaceutical engineering.
Patented stem seal design, spring-compensated design, long life, low torque, long-term high temperature 150 °C.

Specifications: 1/2"-4", DN10-DN100
Temperature: -30 to 150 ° C
Pressure: 10bar
Material: 304/1.4301, 316L/1.4404
Surface: Ra≤0.5μm
Manual, pneumatic, electric interchange
Disassemble the valve dimension without disassembling the pipe
Low steering torque
Washers according to FDA 177.1550
Connection: clamp, welding, thread, DIN, SMS, ISO, IDF, BPE, RJT
The valve body can be replaced regardless of the connection method.
Certification: 3-A-68-00, PED/97/23/EC

Appearance & internal non-retaining ball valve is an all-inclusive ball seat design that solves the problem of the ball valve liquid retention valve cavity. The ball valve is suitable for biopharmaceutical engineering.
Patented stem seal design, spring-compensated design, long life, low torque, long-term high temperature 150 °C.
Specifications: 1/2"-4", DN10-DN100
Temperature: -30 to 150 ° C
Pressure: 10bar
Material: 304/1.4301, 316L/1.4404
Surface: Ra≤0.5μm
Manual, pneumatic, electric interchange
Disassemble the valve dimension without disassembling the pipe
Low steering torque
Washers according to FDA 177.1550
Connection: clamp, welding, thread, DIN, SMS, ISO, IDF, BPE, RJT
The valve body can be replaced regardless of the connection method.
Certification: 3-A-68-00, PED/97/23/EC

Electric ball valve is mainly used in the processing of beverages, wine, oil, cosmetics and chemical industry.
●Body Structure: straight, 3 way
●Size：1"-4",DN25-DN100
●Temperature：-20℃ - 120℃
●Pressure：10-bar
●Material：AISI 304 316L
●Certificate：PED，97/23EC

◎ Standard switching type (B-type) makes valves open and close operations by switching circuit, meanwhile outputs a group of active contacts signal to indicate that valve is fully open or fully closed.
◎ Smart regulating type (A-type) realizes intelligent regulation and control through receiving a standard output signal 4-20mA.DC, 0-10V.DC or 1-5V.DC from computer or industrial instrument as well as outputs 4-20mA.DC
standard feedback signal.
◎ Torque from 6N.M to 2000N.M
◎ Operating time from 7s to 100S
Size: 1 "-4", DN25-DN100
Material: 304 / 316L
Pressure: 10bar
Temperature: -30 to 150 ℃

Horizontal pneumatic straight ball valve, Both manually and automatically operated ball valveare mainly used in processing beverages, wine, oil refining, cosmetics and chemical industries.

●Size：1"-4",DN25-DN100
●Temperature：-20℃ - 120℃
●Pressure：10-bar
●Material：AISI 304 316L
●Gaskets:PTFE FDA 177.1550
●No matter what kind of liquid flow is, the handle can be mounted on the side of the valve body
●Whatever the connection is, it does not change the total length of the valve
●Connection : Clamp, weld, thread,flange,DIN、SMS、RJT、FIL
●Material contact partsAISI 304/316L
●Other parts AISI 304
●Certificate：PED，97/23EC

Ball valve with thermal insulation jacket, both manually or automatically operated valve are mainly used in processing beverages, wine, oil refining, cosmetics and chemical industries.

Thermal insulation ball valve, the valve housing is designed with a jacket in order to achieve optimum heat transfer. It can protect the easy solidification sensitive medium from solidation, such as chocolate, margarine or similar media.

●Size：1"-4",DN25-DN100
●Temperature：-20℃ - 120℃
●Pressure：10-bar
●Material：AISI 304 316L
●Gaskets:PTFE FDA 177.1550
●No matter what kind of liquid flow is, the handle can be mounted on the side of the valve body
●Whatever the connection is, it does not change the total length of the valve
●Connection : Clamp, weld, thread,flange,DIN、SMS、RJT、FIL
●Material contact parts AISI 304/316L
●Other parts AISI 304
●Certificate：PED，97/23EC

Pneumatic ball valve with C TOP, Both manually and automatically operated valve are mainly used in processing beverages, wine, oil refining, cosmetics and chemical industries.

●Size：1"-4",DN25-DN100
●Temperature：-20℃ - 120℃
●Pressure：10-bar
●Material：AISI 304 316L
●Gaskets:PTFE FDA 177.1550
●No matter what kind of liquid flow is, the handle can be mounted on the side of the valve body
●Whatever the connection is, it does not change the total length of the valve
●Connection : Clamp, weld, thread,flange,DIN、SMS、RJT、FIL
●Material contact partsAISI，304/316L
●Other parts AISI 304
●Certificate：PED，97/23EC

Regulating type ball valve is divided into two way, three way, tank bottom ball valve and so on, flow control device is design for dairy,food processing industry, beverage manufacturing, pharmaceutical and fine chemical industry. The most important application is pressure control, flow control, liquid level, etc.
● Pneumatic regulating type ball valve controlled by positioner to achieve flow control (PD) may also adopt self position and flow adjustment (PID) by intelligent process controller.
● Size: 1 "-4", DN25-DN100
● Material: 304 / 1.4301,316L / 1.4404
● Maximum temperature: -30 to 150 ℃
● Maximum pressure: vacuum to 10bar
● 0/4 ... 20mA to 0 ... 5 / 10V (basic type)
● 0/4 ... 20mA position feedback output (option)
● Device NET bus control (option)
● Single action / double action (option)
● Connection: clamp, thread, weld, flange, DIN SMS RJT ISO
● Certificate: 3-A-68-00, FDA 177.1550, PED / 97/23 / EC

Mixproof tank bottom valve, the concept of this double seat valve is characterized by excellent flexibility and easy operation. The typical design let you feel the most perfect body assembled and equipment in all mixproof tank bottom valve.This kind valve is automatic operated through compressed air. The mixing proof valve is constructed with two independent valve core seal .When valve is closed ,the two seal will interlinks to atmosphere .If the liquid is leaking,it will be let out by leakage chamber. At the same time you will see valve have problem or not and some information of destroyed seal , prevent leakage and failure caused by the two media mixing. When the valve is open, the leakage chamber is closed.

●Size: DN40-1.1/2"to DN100-4"
●The valve is equipped with a normally closed pneumatic actuator
●Forged ball valve body
●Compact design
●If there is a gush of fluid leaks from bottom of valve tube, you can determine whether the seal is damaged
●Easy to remove( just removing the clamps is enough)
●Welded connection (mm or inch)
●Balance Protection Design
●Max.Operating Pressure：10bar
●Min.Operating Pressure：Absolute vacuum
●Working temperature：-10℃ - 130℃(140℃ For short periods or disinfection)
●Certificate：3-A-85-03，PED/97/23/EC,FDA177.2600

Mixproof valve / double seat valve
Mixproof valve / double seat valve
◆Size：DN40-1.1/2" to DN100-4"
◆Material：ASTM 316L,1.4404
◆Pressure：10bar
◆Temperature：130℃
◆Gaskets：EPDM,FPM,FDA177.2600
◆Surface finish：Ra≤0.8μm
◆Air supply：5-7bar
◆Certificate：3-A-85-03，PED/97/23/EC,FDA177.2600
Control unit
●Power Supply ：DC 24V±10%
●Single-acting (standard), double acting (option)
●Self-adjusting valves feature feedback
●Supports analog signal (4-20mA) & amp; electrical signal (DC24V) Output
●Support AS-I BUS
●Supports manual and automatic operation

applications.
◆Mixproof valve is a high degree of double-seal valve. Through the interface between two fluids, this system can be implemented in two body synchronization process, preventing the possibility of contaminating materials. leakage chamber and leak detector is self- cleaning by valve seat.
●Size:DN40-1.1/2"to DN100-4"
●The valve is equipped with a normally closed pneumatic actuator
●Forged ball valve body
●If there is a gush of fluid leaks from bottom of valve tube, you can determine whether the seal is damaged
●Easy to remove( just removing the clamps is enough)
●Welded connection (mm or inch)
●Balance Protection Design
●Max.Operating Pressure：10bar
●Min.Operating Pressure：Absolute vacuum
●Working temperature：-10℃ - 130℃(140℃ For short periods or disinfection)
●Certificate：3-A-85-03，PED/97/23/EC,FDA177.2600 ●Compressed air pressure：5bar-7bar
●Gas connection：R1/8"(BSP)

The mixproof butterfly valve as a process element for the separation of media, is suitable for a variety of applications:
●In CIP systems, for separating CIP cleaning fluid
●In flush-out processes
●In water management
●Part of pipeline separates material
●In CIP/gas management (breweries)
●Storage tanks for separating product/CIP
● As CIP reflux valve in the the manifold
● Especially for liquids and no suspension / gas medium particles.
Size: DN25-DN100, 1"- 4"
Material: 1.4404 / 1.4301, 304/ 316L
Maximum Temperature: -10 ℃ - 130 ℃
Maximum Pressure: 10bar
Operation: Pneumatic/ Manual interchangeable
Control Box: C-TOP Basic type, C-TOP + AS-I communication
Seal: EPDM (standard) FPM / SILICON / NBR, FDA177.2600

Double seat butterfly valves can be used in food-processing, pharmacy and chemical industries. The Butterfly Valve offers an easy and safe separatation of products and prevents accidental mixing in case of gasket damage. It is often used to isolate materials that require safe separation and CIP Liquid in a single point (not in manifolds), or at the end of a manifold (e.g. CIP return) or entry of a CIP solution into a tank (through a cleaning ball).

Tank bottom valve is used to vent the container material and the material will not be stuck in the valve chamber, and the design of the seat opens to the inside of the container. It avoids the overvoltage because the pipe leads to the possibility of accidental opening of the valve. The tank bottom valve has 45 ° and 90 ° two designs, pneumatic and manual interchangeable.
●Size：DN25/1" to DN100/4"
●Temperature ：130℃
●Pressure：10bar
●Air supply：4-7bar
●Material：ASTM 304/1.4301，316L/1.4404
●Gaskets：EPDM、FPM、HNBR，FDA177.2600
●Treatment：Ra<0.8μm
●Certificate：3-A-53-06，PED/97/23/EC,FDA177.2600

●The tank bottom seat valve is a pneumatically operated single seat valve, which is assembled at the bottom of tank,used in diary,food processing, beverage,pharmaceutical and fine chemical industries.
●Tank bottom valve is used to vent the container material and the material will not be stuck in the valve chamber, and the design of the seat opens to the inside of the container. It avoids the overvoltage because the pipe leads to the possibility of accidental opening of the valve. The tank bottom valve has 45 ° and 90 ° two designs, pneumatic and manual interchangeable.
●Size：DN25/1" to DN100/4"
●Temperature ：130℃
●Pressure：10bar
●Air supply：4-7bar
●Material：ASTM 304/1.4301，316L/1.4404
●Gaskets：EPDM、FPM、HNBR，FDA177.2600
●Treatment：Ra<0.8μm
●Certificate：3-A-53-06，PED/97/23/EC,FDA177.2600

The tank bottom seat valve is a pneumatically operated single seat valve which is assembled at the bottom of tank,used in diary,food processing, beverage,pharmaceutical and fine chemical industries.
●Tank bottom valve is used to vent the container material and the material will not be stuck in the valve chamber, the design of the seat open to the inside of the container. It avoids the over voltage because the pipe leads to the possibility of accidental opening of the valve. The tank bottom valve has 45 ° and 90 ° two designs, pneumatic and manual interchangeable.

●Size：DN25/1" to DN100/4"
●Temperature ：130℃
●Pressure：10bar
●Air supply：4-7bar
●Material：ASTM 304/1.4301，316L/1.4404
●Gaskets：EPDM、FPM、HNBR，FDA177.2600
●Treatment：Ra<0.8μm
●Certificate：3-A-53-06，PED/97/23/EC,FDA177.2600

Mini divert seat valve is particularly suitable for the filling machine equipment and can replace the traditional type of rotary valve.
Guarantee of lifetime for 1.5 million operattion
◆Size:1/2"-3/4",DN15-DN20
◆Material：304/316L
◆Seal-in-one design
◆Meet the high frequency opens and closes
◆No dead angle designed to meet the requirements of 3A-85-00
◆Seal: FDA177.2600
◆Connection : Clamp, weld, thread, DIN、SMS、ISO