New Energy

Application
◎The safety valve is used to protect the flow pressure safety through pipes, pumps, accessories, pools, etc.
◎With sanitary and safe design, it's avoid operation danger and equipment failure caused by exceed pressure.
◎With sanitary design and completely material of stainless steel, the valves is the best choice for protection of equipment in diary, food, beverage, pharmaceutical and fine chemical industries.

Operating Principles
Manual fast row safety valve features: you can open the valve manually, the spot cleaning (used together with the pump channel) can allow the fluid to pass through
◎Under normal operating conditions, the valve remains closed.
◎The specific pressure is set by adjusting the spring pressure nut.
◎When the pressure in the pipes is exceed the specific pressure, the valve will open automatically to make the liquid pass over,so that pressure in the pipeline is reduced.
◎The valve can be operated with handle . When the handle remains open on the operation spot, the detergent can flow though the flow valves.

◆Size：1"-4",DN25-DN100
◆KV Value：8.5-180m3/h
◆Max. Temperature：130℃(EPDM)/266℉
◆Set Pressure：(0-3bar/0-6bar/6-10bar）
◆Material：304/316L
◆Certification: safety valve manufacturing license for special

Application
◆The safety valve is used to protect the pressure flowing through pipes, pumps, accessories, pools, etc.
◆ The safety valve is designed to be healthy and safe to prevent danger and equipment failure due to pressure.
◆ Hygienic design and complete stainless steel manufacturing, this valve is the best choice for protection equipment in the dairy, food, beverage, pharmaceutical, fine chemical industry.

Principle of operation
◆ The valve remains closed under normal operating conditions.
◆ The valve is calibrated to a specific pressure by adjusting the spring with the pressure nut.
◆ When the pressure in the pipeline exceeds a certain pressure, the valve opens and allows fluid out, thereby reducing the pressure in the piping system.

Technical specifications
◆Specifications: 1"-4", DN25-DN100
◆KV value: 8.5-180m3/h
◆Maximum temperature: 130°C (EPDM)/266°F
◆Setting pressure: (0-3bar/0-6bar/6-10bar)
◆Material: 304/316L
◆ Certification: Safety Valve Special Manufacturing License

The pressure reducing valve is a very easy operation of the pressure control valve which provides precise control and easy installation and maintenance.
◆The valve can control the valve after pressure without needing for a pneumatic or electric control element.Pressure relief valve is a two-seat diaphragm controlled springloaded proportional control valve which is mainly used in food, beverage, brewery,pharmaceutical, chemical and other industries.

SIZE：1 "-3", DN25-DN80
Nominal pressure：PN2.5-10
Inlet pressure：8bar
Outlet pressure：0.3-5bar
Kv Value：4-70m3/h
Max. temperature：180℃
Medium: steam, liquids and gases
Connection mode : Clamps, welding, thread,Flange
Certificate：3-A-64-00，PED/97/23/EC,FDA177.5500

Application
◎The safety valve is used to protect the flow pressure safety through pipes, pumps, accessories, pools, etc.
◎With sanitary and safe design, it's avoid operation danger and equipment failure caused by exceed pressure.
◎With sanitary design and completely material of stainless steel, the valves is the best choice for protection of equipments in diary, food, beverage, pharmaceutical and fine chemical industries.

Operating Principles
Manual fast row safety valve features: you can open the valve manually, the spot cleaning (used together with the pump channel) can allow the fluid to pass through
◎Under normal operating conditions, the valve remains closed.
◎The specific pressure is set by adjusting the spring pressure nut.
◎When the pressure in the pipes is exceed the specific pressure, the valve will open automatically to make the liquid pass over,so that pressure in the pipeline is reduced.
◎The valve can be operated with handle . When the handle remains open on the operation spot, the detergent can flow though the flow valves.

◆Size：1"-4",DN25-DN100
◆KV Value：8.5-180m3/h
◆Max. temperature：130℃(EPDM)/266℉
◆Set pressure：(0-3bar/0-6bar/6-10bar）
◆Material：304/316L
◆Certification: safety valve manufacturing license for special

◆The pressure reducing valve is a very easy operation of the pressure control valve which provides precise control and easy installation and maintenance.
◆The valve can control the valve after pressure without the need for a pneumatic or electric control element.Pressure relief valve is a two-seat diaphragm controlled spring loaded proportional control valve which is mainly used in food, beverage, brewery,pharmaceutical, chemical and other industries.

SIZE：1 "-3", DN25-DN80
Nominal pressure ：PN2.5-10
Inlet pressure：8bar
Outlet pressure：0.3-5bar
Kv Value：4-70m3/h
Max. temperature:180℃
media: steam, liquid, gas
Connection mode : Clamps, welding, thread,Flange
Certificate：3-A-64-00，PED/97/23/EC,FDA177.5500

◆Miniature Constant Pressure Regulating Valve is a sanitary constant pressure valve to be applied to the food processing, beverage, pharmaceutical and other areas of the pipeline system.
◆Constant pressure design has two kinds to maintain a constant pressure function selection：
1) V type (inlet constant pressure); maintain constant pressure at the valve inlet. Such design is specially applied at the back of heat-exchanger. It is used as safety valve.
2) A type (Outlet constant pressure): maintain constant pressure at the outlet. Such design is used as the front of filling machine and bottle filling machine.
◆Size：3/4"-1.25",DN20-DN32
◆KV Value：10-21m3/h
◆Contact part of the material: 1.4404/316L, other parts: 304
◆Seal： EPDM+PTFE(FDA177.2600)
◆Connection mode : Clamps, welding, thread,ISO、DIN、SMS、RJT
◆Surface: sand blast outside, mirror finished inside (Ra≤0.6μm)
◆Working temperature: -10 to 150 ℃
◆Working pressure： 8 bar
◆The max working pressure: 12 bar Supercheuger(option)
◆Certificate：3-A-64-00，PED/97/23/EC,FDA177.5500

◆Constant pressure valve is a sanitary constant pressure valve to be applied to the food processing, beverage, pharmaceutical, and other areas of the pipeline system.
◆Constant pressure design has two kinds to maintain a constant pressure function selection：
1) V type (Inlet constant pressure); maintain constant pressure at the valve inlet. Such design is specially applied at the back of heat-exchanger. It is used as safety valve.
2) A type (Outlet constant pressure): maintain constant pressure at the outlet. Such design is used as the front of filling machine and bottle filling machine.

◆Size：1.5"-3",DN40-DN65
◆KV Value：KV36m3/h to KV62m3/h
◆Contact part of the material: 1.4404/316L, other parts: 304
◆Seal： EPDM+PTFE(FDA177.2600)
◆Connection mode : Clamps, Welding, Thread,ISO、DIN、SMS、RJT
◆Surface: sand blast outside, mirror finished inside (Ra≤0.6μm)
◆Working temperature: -10 to 150 ℃
◆Working pressure： 8 bar
◆The max working pressure: 12 bar ,Supercheuger(option)
◆Certificate：3-A-64-00，PED/97/23/EC,FDA177.5500

The level gauge is mainly applied to the tank equipment. The two same gauges or two different gauges are assembled on the tank so that the liquid condition or capacity can be observed and the sample can be extracted.
◎Size:1/4",3/8",1/2",3/4"
◎Connections: thread, clamp, weld
◎Certificate: PED 97/23/EC,FDA 177.2600
◎when turn the hand wheel clockwise, the valve shaft and seal rise up. At this time, valve is open for sampling. When turn the hand wheel anti-clockwise, the valve shaft and seal go down,at that time, the valve is closed.
◎Thread; Nut; welding; Clamps

◎its mainly applied to extract sample from tank or pipeline. It also can be assembled at the bottom of the tank or pipeline to drain away the waster liquid
◎Operating principle：when turn the hand wheel clockwise, the valve shaft and seal rise up. At this time, valve is open for sampling. When turn the,hand wheel anti-clockwise, the valve shaft and seal go down,at that time, the
valve is closed.
◎Applicable temperature：－10℃ -130℃
◎Body material：AISI 304 AISI 316L
◎Seal material：PTFE
◎Connection: clamp, threaded, welded, Nut、

◆The valve seat opens inside of tank or other equipment that it can avoid opening by accident due to much pressure in the pipes.
◆The valve is normally closed(by spring). The valve is open as soon as pushing the handle and closed when loosing up.
◆The design of completely drainage water is to avoid remains inside the valves. Technical specification
◆Material：316L
◆Temperature：130℃
◆Pressure：10bar

◆Straight sampling valve open inside of tank or other equipment that it can avoid opening by accident due to much pressure in the pipes.
◎Operating principle:when turn the hand wheel clockwise, the valve shaft and seal rise up. At this time, valve is open for sampling. When turn the,hand wheel anti-clockwise, the valve shaft and seal go down,at that time, the valve is closed.
◎Temperature：－10℃ -130℃
◎Body material： AISI 304 AISI 316L
◎Seal material： PTFE
◎Connection: clamp, thread, weld, Nut

Mini type diaphragm sampling valve manual / pneumatic operation, T type, L-type 3 way, U-type 3 way, straight type etc. These valves are mainly used in the solid-liquid sampling on biological systems, laboratories and other projects.
Design Features
●Size: 1/4 "-3/4"，DN6-DN15
●Diaphragm PTFE+EPDM/Silicong/EPDM/FPM
●Max temperature: 150℃, ok for CIP/SIP
●Max pressure: 10bar
●Standards: BPE 3A DIN ISO IDF
●Material：316L,1.4404
●Max temperature: - 30 to 150 ℃ (depending on seal material) (stainless steel actuator)
●Max temperature: - 30 to 130 ℃ (depending on seal material) (plastic actuator)
●Max pressure: one way (DELTA P = 100%)
Normally close EPDM 8 bar, PTFE 6 bar (option)
Normally close EPDM 6 bar, PTFE 4.5 bar (standard)
Normally open and double action EPDM 8 bar, PTFE 6 bar
●Certificate: PED/97/23/EC，3A/54-04/1580，FDA.177.2600

◆The aseptic sampling valve is designed for sterilization before and after each sampling.
◆Open to Sampling-Valve is opened by rotating the handle
◆Closed to Sterilizing-The built-in spring closes the valve. Do Keep hose channel open while sterilizing and recommend to install a small safety valve on the outside if sterilizing by steam.
◆Connection: clamp, welding, tank connector, multi-channel pipeline connector
◆Valve body material：AISI 316L（1.4404）ASME BPE 316L
◆Diaphragm：EPDM PTFE
◆Max. Temperature：130℃(EPDM)
◆Max. Temperature：150℃(PTFE)
◆Pressure： 10bar
◆Certificate：3-A-55-02，PED/97/23/EC

◆The aseptic sampling valve is designed for sterilization before and after each sampling.
◆Open to Sampling-Valve is opened by rotating the handle
◆Closed to Sterilizing-The built-in spring closes the valve. Do Keep hose channel open while sterilizing and recommend to install a small safety valve on the outside if sterilizing by steam
◆Application: The aseptic sampling valve is applied to beer, milk, beverage, fruit juice, pharmacy industries etc.
◆Connection: Welding, Clamp.
◆Valve body material：AISI 316L（1.4404）ASME BPE 316L
◆membrane：EPDM PTFE
◆Max. Temperature：130℃(EPDM)
◆Max. Temperature：150℃(PTFE)
◆Pressure：10bar
◆Certificate：3-A-55-02，PED/97/23/EC

◆The aseptic sampling valve is designed for sterilization before and after each sampling.
◆Open to Sampling-Valve is opened by rotating the handle
◆Closed to Sterilizing-The built-in spring closes the valve. Do Keep hose channel open while sterilizing and recommend to install a small safety valve on the outside if sterilizing by steam.
◆Appplication: The aseptic sampling valve is applied to beer, milk, beverage, fruit juice, pharmacy industries etc.
◆Connection: clamp, welding
◆Valve body material：AISI 316L（1.4404）ASME BPE 316L
◆Membrane：EPDM PTFE
◆Max. Temperature：130℃(EPDM)
◆Max. Temperature：150℃(PTFE)
◆Pressure：10bar
◆Certificate：3-A-55-02，PED/97/23/EC

◎Specifications:DN8-DN50,1/2"-2"
◎Material：CF8/304，CF8M/316
◎Nominal pressure：PN1.6，2.5，4.0，6.4MPa
◎Strength test pressure：PN2.4，3.8，6.0，9.6MPa
◎High pressure seal pressure test：1.8，2.8，4.4，7.1MPa
◎Applicable medium：H1 H-(16-64)C Water, oil, gas
◎Applicable temperature：-40~180℃

◎Check valve is designed to prevent fluid from flowing back and ensure the flow to one way direction.
◎It can be used to reduce the loss of fluid back suction,avoid pipe is shock by liquid
◎It is used in the food-processing, beverages, winery, oil, cosmetics,pharmaceuticals and chemicals industries.
◎The valve is open when pressure of the fluid exceeds the spring pressure and it is closed when the two pressures are close equal.And stronger counter-pressure also makes the valve closed.
◎Specifications: DN-25/1" TO DN-100/4"
◎Boby/shaft: AISI 316L/304
◎Spring: AISI 304
◎Seal: EPDM according to FDA177.2600
◎Surface Treatment: Ra ≤0.8 μm
◎Seal: NBR, FPM (Viton) or PTFE. FDA 177.2600(optional)
◎Connections: weld, thread, clamp, DIN, SMS, RJT, IDF, ISO,3A
◎Max. pressure：10 bar
◎Opening pressure：0.3bar(DN-25) 0.2bar(DN-32/40) 0.1bar(DN-50/100)
◎Working temperature ： -10℃ to 130℃(EPDM)

Pneumatic angle seat valve with control unit is a general switch in the automatic control system widely used in printing, dyeing, bleaching, food,washing,chemical, water treatment, pharmacy and other automatic machinery and equipment. It is featured with water hammer protection,noise-free, reliable sealing performance.

Size：1/2"-3",DN10-DN80
Material：CF8、CF8M
Connection : Clamp, weld, thread，BSP/BSTP/NPT,DIN,Inch
Control unit
Position feedback, Can be viewed on (Green) off (Red)
Built-in Solenoid valve
Valve opens– green light
Valve closes-red light
The design has inching button (manual design)
Power Supply：DC 24V ±10%
Air supply：M5/Φ4

Pneumatic angle seat valves with Positioner is mainly used in the flow control valve adjustment. The medium contacting with the valve and the position is only stainless steel and PTFE. Maximum temperature can reach to 180 ℃, pressure up to 20bar. It can also be used in vacuum environment. According to the design of valve body without dead angle, surface roughness up to Ra0.4 μ m,valve seal with embedded designs, it is used very broadly covering almost all sectors, such as pharmaceuticals, food andbeverage, brewery, chemical and other industries. The valve is particularly suitable for steam flow regulating control system.

◆Size: 1/2"-3", DN10-DN80
◆Material: CF8/304、CF8M/316
◆Connection : Clamp,thread,flange,BSP,BSP,NPT,DIN
◆Working pressure：8bar(standard) 10bar(Options)
◆Working temperature：120℃(standard) 180℃(Options)
●0/4...20mA to 0...5/10V（standard）
●0/4...20mA Position feedback output (Options)
●Device NET Device Net bus control (Options)
●Support single self-tuning function
●Protection grade IP67
●Power Supply DC 24V ±10%
●Support manual and automatic operation

Pneumatic angle seat valve is a general switch in the automatic control system which is widely used in printing, dyeing, bleaching, food,washing,chemical, water treatment, pharmacy and other automatic machinery and equipment. It is featured with water hammer protection,noise-free, reliable sealing performance.
Design Features
● Size: 1/2"-2 1/2", DN10-DN65
● Material: CF8/304、CF8M/316
● Connection : Clamp,thread,flange,BSP、BSP、NPT,、DIN
● Pneumatically operated:
1）Can be configured to position sensor
2）valve locator (process controller)
3）Valve position Regulator
4）MINI C-TOP Control unit
●Manual pneumatic interchangeable
●Working pressure：8bar(standard) 10bar(option)
●Working temperature：120℃(standard) 180℃(option)

Application
Angle seat valve is a general switch in the automatic control system which is widely used in printing, dyeing, bleaching, food,washing,chemical, water treatment, pharmacy and other automatic machinery and equipment. It is featured with water hammer protection,noise-free, reliable sealing performance.

Design Features
● Size: 1/2"-2 1/2", DN10-DN65
● Material: CF8/304、CF8M/316
● Connection : Clamp,thread,flange,BSP、BSP、NPT,、DIN
● Pneumatically operated:
1）Can be configured to position sensor
2）valve locator (process controller)
3）Valve position Regulator
4）MINI C-TOP Control unit
●Manual pneumatic interchangeable
●Working pressure：8bar(standard) 10bar(option)
●Working temperature：120℃(standard) 180℃(option)

◎ Specifications: DN8-DN50,1 / 2 & quot; -2 & quot;
◎ Nominal pressure: PN1 .6,2.5,4.0,6.4MPa
◎ strength test pressure: PT2.4,3.8,6.0,9.6MPa
◎ High pressure seal pressure test: 1.8,2.8,4.4,7.1MPa
◎ Applicable medium: J11W- (16-64) C water, oil, gas, J11W- (16-64) P nitric acid, J11W- (16-64) R acetic acid
◎ Applicable temperature: -40 ~ 180 ℃
◎ Material: CF8, CF8M

◎Specifications：DN15-DN200,1/2"-8"
◎Nominal pressure：PN1.6-6.4, Class 150/300,10k/20k
◎Strength test pressure：PT1.5PN
◎High pressure seal pressure test：1.1PN
◎Applicable medium：J41H-(16-64)C water, oil, gas J41W-(16-64)P nitric acid J41W-(16-64)R acetic acid
◎Applicable temperature：-40~180℃
◎Material：CF8、CF8M

Horizontal pneumatic three way non retention ball valve, the hygienic design of the valve is widely used in the field of food processing, beverages, fruit juices, wine, biopharmaceutical with vary flexible body combinations, for example, L-Port or T-Port which can be interchangeable on-site Inlet and outlet to be any combination of changes for guaranting zero dead angle and no retention.

Technical specifications
Size：1"-4",DN25-DN100
Material：1.4301/304,316L/1.4404
Gaskets：PTFE,TFM(FDA 177.1550)
Max. temperature：-20℃ - 150℃(Standard)-30℃ - 200℃(Option)
Pressure:10-30bar(Depending on seal material and temperature)
Operating modes:manual, pneumatic, electric
Surface finishing:Internal surface Ra0.6μm, external surface sand blast
Certificate：3-A-68-00，PED/97/23/EC
Configuration Controls：process controller/valve positioning ，0/4....20mA,0 5/10V(see controller directory)(Option)
Top of the valve control unit，AS-1 Device Net bus communication terminal connection(Option)
position sensor PNP NPN(Option)