Semiconductor

The MLX series is a high-flow centrifugal pump with open impeller design. The hydraulic model is designed with CED to improve the over-flow performance of low-viscosity particulate materials and reduce the shear of materials under the premise of ensuring high-efficiency hydraulic performance. Cut and damage, the pump casing and liquid contact parts are all made of 304/316L stainless steel. It is mainly used for the transportation of solid particles and low-viscosity weak corrosive materials such as juice fermentation broth, wort and food and beverage juice jam. It can also be used for general industrial water or drinking water treatment.
Flow Flow: 100m3-1000m3
Head Head: 40 H/M
Temperature Temperature : -20 to 140 ° C
Power power :11kw-130KW
Material Material: 304 /316L, 1.431/1.4404, ASME BPE 316L, 1.4435 NB2 Fe≤0.5%
Surface treatment: ≤ Ra0.8μm, ≤ Ra0.6μm, ≤ Ra0.4μm
Machine seal: single machine seal (see configuration scheme);
Inlet/outlet connection: flange, sterile flange; Inlet/Outlet Connection : Flanged, Aseptic flanged
Certified: 3-A-02-10 (N.O.1579); MD/06/42-EC (N.O.70521616101-00); FDA 177.2600; USP CLASS-II; EG/VO1935/2004;

The DLX series centrifugal pump is?multi-stage impeller centrifugal pump with a high clean, high efficiency, high lift and economical delivery pump. The highest lift is up to 280 m (28 bar) and the conveying medium is soft and hygienic. Mainly used in?bio-pharmaceutical, food and beverage, wine, water treatment, fine chemicals and other industrial fields.
Maximum flow Max Flow: 50m3/h
Maximum head Max Head: 280 H/M
Maximum temperature Max Temperature :-10°C-140°C
Material Material: 304 /316L, 1.431/1.4404, ASME BPE 316L, 1.4435 NB2 Fe≤0.5%
Surface treatment: ≤ Ra0.8μm, ≤ Ra0.6μm, ≤ Ra0.4μm
Machine seal: single seal, double seal?
Inlet/Outlet Connection: Thread, Clamp, Flange, Aseptic Flange
Certified: 3-A-02-10 (N.O.1579); MD/06/42-EC (N.O.70521616101-00); FDA 177.2600; USP CLASS-II; EG/VO1935/2004;

The DJ-CLX series of centrifugal pumps not only optimize the internal structure, impeller design, dead angle treatment, machine seal pressure balance design and the machine seal is completely in the flushing area. We also optimized the external hygiene of the pump to make it absolutely hygienic and reduce the dead angle inside. Because there is no dead zone, it is very easy to be cleaned by CIP, SIP sterilization?so on. In addition, we have the largest flexibility combination for the DJ-CLX series of pumps. For example, the pump outlet angle can be adjusted from 0° to 360°. The pump cover is clamp connection,?so?the pump can be maintained easily . The replacement of the seals maintains high efficiency and reduces the high degree of professionalism of the personnel,?no special tools are required to complete these. Therefore, the goal of achieving high efficiency, hygiene, high reliability and low cost has made the DJ-CLX series centrifugal pump into a high-performance pump.
Maximum flow rate Max Flow rate: 120m3/h
Head Head: 70 H/M
Temperature Temperature : -20 ° C to 140 ° C
Power Power : 1.1KW-30KW
Material Material: 304 /316L, 1.4301/1.4404, ASME BPE 316L, 1.4435 BN2 Fe≤0.5%
Surface treatment: ≤ Ra0.8μm, ≤ Ra0.6μm, ≤ Ra0.4μm Mechanical seal: single machine seal, double machine seal Inlet/Outlet Connection: thread, clamp, flange, aseptic method Certification: 3-A-02-10 (NO1579); MD/06/42-EC (NO70521616101-00); FDA 177.2600; USP CLASS-II; EG/VO1935/2004

The DJ-SCLX series is an all-stainless steel centrifugal pump that contains stainless steel motor . Not only optimizes the internal structure, impeller design, dead angle treatment, machine seal pressure balance design and the machine seal is completely in the flushing area. We also optimized the external hygiene of the pump to make it absolutely hygienic and reduce the dead angle inside. Because there is no dead zone, it is very easy to be cleaned by CIP, SIP sterilization ,etc. In addition, we have the largest flexibility combination for the DJ-SCLX series of pumps. For example, the pump outlet angle can be adjusted from 0° to 360°. The pump cover is clamp connection, so that the pump can be maintained easily. The replacement of the seals maintains high efficiency and reduces the high professionalism of the personnel, it do not require special tools. The DJ-SCLX series centrifugal pump has become a high-performance pump due to its high efficiency, hygienic, high reliability and low cost.

● Intelligent valve positioner, which is mainly used in the fluid process control system, achieves valve flow adjustment control.
● The controller can be fitted to variety of pneumatic valves, for example, diaphragm valve, divert seat valve, angle seat valve, butterfly valve, ball valve and other valves.
● 0/4 ... 20mA to 0 ... 5 / 10V signal input (standard)
● 0/4 ... 20mA to 0 ... 5 / 10V position feedback output (option)
● Mod bus (RS485)control (option)
● Device NET bus control (option)
● Single-acting?/ double acting?(option)
● Linear actuator / rotary actuator (option)
● Power: DC.24V
● Air pressure: 5.0-7.0Bar
● Protect class: IP68

The RX series of flexible vane pumps are volumetric pumps with excellent self-priming performance and have self-priming capacity up to 5 meters. The viscous product delivers almost the same efficiency as pumping, so it is very versatile, suction treatment is very smooth and soft, never whipping or damaging the product, even fragile products like high fat cream. Large berries, even like half of peach can be pumped without damage, the pump run completely pulsating. It can also be used as a dosing pump by adjusting the pump speed.
Max flow: 20m3/h
Max pressure: 4 bar
Max suction: 5 M
Max Temperature: 80℃
Rotating speed：1450 R.P.M
Material：316L/1.4404
Surface treatment：Ra≤0.6μm；EP=Ra0.4μm
Certification：3-A-02-11 No.1759；FDA 177.2600 ； CE-MD/06-42 No.705201616101-00

Specifications: 1"-6",DN10-DN150
Material：ASTM304/316L,1.4301/1.4404
Inner surface：Ra0.8μm，mechanical polishing and Electro polishing
outer surface：Ra0.8μm，mechanical polishing
Standards：DIN11851、RJT、SMS、DS、ISO、IDF,etc
Authentication：3-A-63-03；EN 10204-3.1 Certificate

Clamp Hose fitting are used to connect the part by hose in pipeline or some equipment
Specifications：1/2"-6",DN10-DN150
Connection mode：Clamps, welding, thread
Standard：DIN Inch
Material：ASTM 304/316L,1.4301/1.4404

Pipe Holder
Type: Hexagon，Round,Rubber anti-vibration
Specifications: 1/2"-8",DN10-DN200
Material：ASTM304/316L,1.4301/1.4404
Connection mode：welding, thread
Applicable Standards：DIN11852/11850、AS1528、SMS、DS、BS4825、ISO、IDF,etc.
Authentication, 3-A-63-03；EN 10204-3.1 Certificate；

Specifications: 1/2"-8",DN10-DN200
Material：ASTM304/316L,1.4301/1.4404
Specifications: 1/2"-8",DN10-DN200
Material：ASTM304/316L,1.4301/1.4404
Inner Surface：Ra0.5μm，Mechanical Polishing & Electro Polishing
Outer Surface：Ra0.8μm，Mechanical Polishing
Connection : Ferrule, Welding, Thread
Standards：DIN11852/11850、AS1528、SMS、DS、BS4825、ISO、IDF,etc.
Authentication: 3-A-63-03；EN 10204-3.1 Certificate；

The DIN 11864 series Flange and Union are design by sterilization and no dead corner. Same with ASME BPE . It is especially suitable for the pipeline system in biological pharmaceutical sterilization high cleanliness requirement.
Aseptic Flange size:1/2"-6",DN10-DN150
Aseptic Union size:1"-6",DN25-DN150
Aseptic Ferrule size：1/2"-6"，DN10-DN150
Gasket：EPDM；FPM，FDA177.2600，3-A-18-03
Surface Finish: DIN 11866
Mechanical Polishing：0.4μm=HE4c
Electro Polishing：0.25μm=HE5c
Material：1.4404；1.4435 NB2 Fe＜0.5%

Similar Products：Y-Tee, U-tee, R-tee
Wall Thickness:1.2mm,1.5mm,1.65mm,2.0mm,2.8mm
Material: ASTM304/316L,1.4301/1.4404
Implementation of Standards ：DIN11850 SMS ISO IDF DS BS4825 AS1528
High-grade Standard：ASME BPE 316L DIN11866 1.4404
Inner Surface：Mechanical PolishingRa0.4μm,0.8μm；Electro Polishing：Ra0.4μm
Outer Surface：Ra0.8μm

Thermal Insulation Jacket Pipe
The design has an insulating jacket shell, in order to achieve the best heat transfer.It can protect the easy solidification sensitive medium, cases of chocolate, margarine or similar media holding liquid flow
Specifications：DN25-DN100，1"-4"
Material: ASTM304/316L,1.4301/1.4404
Connection mode：Clamp,threaded,flanged
Standards:DIN11850 SMS ISO IDF DS BS4825 AS1528
Inner Surface: Mechanical Polishing Ra0.4μm,0.8μm；
Outer Surface：Ra0.8μm

High purity stainless steel piping
Specifications:1/2"10",DN10-DN250,
Wall Thickness:1.2mm,1.5mm,1.65mm,2.0mm,2.8mm
Material: ASTM304/316L,1.4301/1.4404，ASME BPE 316L
Implementation of Standards ：DIN11850 SMS ISO IDF DS BS4825 AS1528
High-grade standard：ASME BPE 316L DIN11866 1.4404
Inner Surface: Mechanical Polishing Ra0.4μm,0.8μm；Electro polishing：Ra0.4μm
Outer Surface：Ra0.8μm

Product type:elbow,tee,reducer,threaded connector
Specifications: 1/2"-8",DN10-DN200
Material：ASTM304/316L,1.4301/1.4404
Inner surface：Ra0.5μm，mechanical polishing & Electro polishing
outer surface：Ra0.8μm，mechanical polishing
Standards：DIN11852/11850、AS1528、SMS、DS、BS4825、ISO、IDF,etc
Authentication：3-A-63-03；EN 10204-3.1 Certificate；

Product Type：elbow,tee,reducer,clamp connector,cross
Specifications: 1/2"-8",DN10-DN200
Material：ASTM304/316L,1.4301/1.4404
Inner surface：Ra0.5μm，mechanical polishing & Electro polishin
outer surface：Ra0.8μm，mechanical polishing
Connection mode：Clamps, welding, thread

Weld Pipe Fittings Series
Product Type:Elbow, Tee, Reducer,Ferrule,Cross
Size: 1/2"-8",DN10-DN200
Material：ASTM304/316L,1.4301/1.4404
Inner surface：Ra0.5μm，mechanical polishing & Electro polishing
Outer surface ：Ra0.8μm，mechanical polishing
Connection : Clamps, welding, thread
Implementation of standards：DIN11852/11850、AS1528、SMS、DS、BS4825、ISO、IDF,etc.
Authentication:3-A-63-03；EN 10204-3.1 Certificate

I-Line fitting is the ideal choice for industrial of food,brewing, oil and water solution. I-Line fittings can stand higher vibrations,temperatures and pressure than other available connections. It is easy to disassembly and complies with food grade.
Specifications1"-8"
Material:ASTM 304/316L
Surface Treatment：180grit/300Grit
Gaskets Select :EPDM/FPM/NBR/Silicong
Certified by 3A-63-02, in line with the FDA.177.2600

It is the best choice for biological control of high cleanliness requirements of the pipe fittings.
At first Pipes and fittings of high quality can shorten the installation of preparation. Second, it can avoid practical welding arc deflection phenomenon in operation and is easy operated by automatic welding machine and no need adjust parameters repeatedly . It saves the welding time ,eventually shortens the construction period.

Pipeline：1“-6”
Elbow：1“-6”
Tee：1"-6"
Reducer：1"-6"
Ferrule：1/2"-6"
Instrument Tee：1、2“-1.5
Mechanical Polishing：Ra0.51μm=SF1
Electro Polishing：Ra0.38μm=SF4
Material：ASTM 316L

●The floor drain is applicable to the food,modified material, pharmaceutica in sanitary and clean workshop.
●Stainless steel: AISI304/316L
●Size: 1"-4",DN25-DN100
●Mesh and plug head prevent particle material go into drain pipe
●Remove cover and sludge hopper to clean floor drain in case of the propagation of bacteria

The duplex filters applies to purify solids that cannot be seen with the naked eye, such as milk, sugar, soft drinks and other liquid in the barrel. Two filters are used interchangeably, Don't need stop it to replace or wash the filter. It is suitable for continuous production.
Filter body material：AISI 316L、AISI 304
Gasket：EPDM FDA 177.2600
Inner surface treatment：Ra＜0.4μm
Hole Dia：0.5mm to 2.0mm
Mesh size：30Grits to 300Grits
Size：DN 25-DN150/1"-6"
Working temperature：-10℃-120℃(EPDM)
Max. working pressure：10bar 145PSI

Filter are widely used in the auxiliary service for food processing, cosmetic, chemicals and pharmacy industries. With high hygienic design,it is mainly used to filter the particulates which will damage pumps and some other equipment .The filter is basiclly consist of inlet outlet and filter body. Filter mesh is installed inside to remain all particles equal or greater than mesh

Size：DN25-DN150 1"-6"
Working temperature：-10℃-120℃(EPDM)
Max. working pressure：10bar 145PSI
Gasket：Silicon MVQ FPM
Connection: clamp,thread, weld
Standard:DIN,SMS,RJT,IDF,3A
Hole Dia：0.5mm to 2.0mm
Mesh size: 30 Grits to 300 Grits

Filter are widely used in the auxiliary service for food processing, cosmetic, chemicals and pharmacy industries. With high hygienic design,it is mainly used to filter the particulates which will damage pumps and some other equipment. The filter is basiclly consist of inlet outlet and filter body. Filter mesh is installed inside to remain all particles equal or greater than mesh
Size：DN25-DN150 1"-6"
Working temperature：-10℃-120℃(EPDM)
Max. working pressure：10bar 145PSI
Gasket：Silicon MVQ FPM
Connection: clamp,thread, weld
Standard:DIN,SMS,RJT,IDF,3A
Hole Dia：0.5mm to 2.0mm
Mesh size: 30 Grits to 300 Grits

Filter are widely used in the auxiliary service for food processing, cosmetic, chemicals and pharmacy industries. With high hygienic design,it is mainly used to filter the particulates which will damage pumps and some other equipment.The filter is basiclly consist of inlet outlet and filter body. Filter mesh is installed inside to remain all particles equal or greater than mesh

Size：DN25-DN150 1"-6"
Working temperature：-10℃-120℃(EPDM)
Max. working pressure：10bar 145PSI
Gasket：Silicon MVQ FPM
Connection: clamp,thread, weld
Standard:DIN,SMS,RJT,IDF,3A
Hole Dia：0.5mm to 2.0mm
Mesh size: 30 Grits to 300 Grits