Union

Specifications: 1"-6",DN10-DN150
Material：ASTM304/316L,1.4301/1.4404
Inner surface：Ra0.8μm，mechanical polishing and Electro polishing
outer surface：Ra0.8μm，mechanical polishing
Standards：DIN11851、RJT、SMS、DS、ISO、IDF,etc
Authentication：3-A-63-03；EN 10204-3.1 Certificate

Clamp Hose fitting are used to connect the part by hose in pipeline or some equipment
Specifications：1/2"-6",DN10-DN150
Connection mode：Clamps, welding, thread
Standard：DIN Inch
Material：ASTM 304/316L,1.4301/1.4404

Pipe Holder
Type: Hexagon，Round,Rubber anti-vibration
Specifications: 1/2"-8",DN10-DN200
Material：ASTM304/316L,1.4301/1.4404
Connection mode：welding, thread
Applicable Standards：DIN11852/11850、AS1528、SMS、DS、BS4825、ISO、IDF,etc.
Authentication, 3-A-63-03；EN 10204-3.1 Certificate；

Specifications: 1/2"-8",DN10-DN200
Material：ASTM304/316L,1.4301/1.4404
Specifications: 1/2"-8",DN10-DN200
Material：ASTM304/316L,1.4301/1.4404
Inner Surface：Ra0.5μm，Mechanical Polishing & Electro Polishing
Outer Surface：Ra0.8μm，Mechanical Polishing
Connection : Ferrule, Welding, Thread
Standards：DIN11852/11850、AS1528、SMS、DS、BS4825、ISO、IDF,etc.
Authentication: 3-A-63-03；EN 10204-3.1 Certificate；

The DIN 11864 series Flange and Union are design by sterilization and no dead corner. Same with ASME BPE . It is especially suitable for the pipeline system in biological pharmaceutical sterilization high cleanliness requirement.
Aseptic Flange size:1/2"-6",DN10-DN150
Aseptic Union size:1"-6",DN25-DN150
Aseptic Ferrule size：1/2"-6"，DN10-DN150
Gasket：EPDM；FPM，FDA177.2600，3-A-18-03
Surface Finish: DIN 11866
Mechanical Polishing：0.4μm=HE4c
Electro Polishing：0.25μm=HE5c
Material：1.4404；1.4435 NB2 Fe＜0.5%