Water Treatment

Manual pneumatic integrated, membrane pneumatic proportional control valve, which can be applied to various flow control and adjustment systems, and can be applied in various industrial fields such as chemical, sewage treatment, dairy, food, beverage production, pharmaceutical and fine. Industrial fields such as chemical industry. The most important applications are pressure control, flow control, liquid level, temperature control, etc.
Control input: 0/4-20mA/0-5V/10V
Feedback output : 0/4-20mA/0-5V/10V
Power supply : DC24V ± 10%
Bus communication: MODE BUS RS485
Accuracy: Repeat positioning accuracy ≤ 0.2%;
Menu: OLED display Chinese & English
Setting: One-button auto-tuning function
Operating mode: manual / automatic
Fault: gas cut, power off, automatic valve position reset (standard) valve position hold function (optional)
Stroke angle: 0-180°
◆The valve position is not consuming when it is kept
◆Power supply: DC24V ±10%
●Scope of application: straight stroke and angular travel 30°-180°
●Aluminum alloy casing
●Explosion-proof grade ExdIIBT4 (optional)
●IP68 protection level

ITS-100 is a rotary angular stroke pneumatic valve position feedback device designed primarily for valve process position feedback. It is compatible with most PLC (Programmable Logic Controller) automation systems and used to control all types of process valves. . It can be mounted on a variety of pneumatic valves, such as pneumatic butterfly valves, ball valves, globe valves and other rotary stroke valves.....
Passive signal

Feedback output: 2 passive signals
Open: Green
Close: red
Stroke angle: 0-180°

Active signal

Feedback Output : PNP DC 24V
Open: Green
Close: red
Stroke angle: 0-180°

DJ-CIP-L series self-priming pump not only optimizes the internal structure, impeller design, dead angle treatment, machine seal pressure balance design and the machine seal is completely in the flushing area， but?also optimized the external hygiene of the pump to make it more hygienic and reduce the dead angle inside. Because there is no dead zone, it is very easy to be cleaned by CIP, SIP sterilization and so on. In addition, we have maintained the most flexible combination of DJ-CIP series pumps. For example, the pump outlet angle can be adjusted from 0° to 135°, It?keeps the pump maintenance and maintenance and machine seal replacement efficient. The requirement for a high degree of professionalism is reduced, and these do not require special tools. Therefore, the goal of achieving high efficiency, hygiene, high reliability and low cost is to make the DJ-CIP series pump into?high performance self-priming pump.
Maximum flow rate Max Flow rate: 40m3/h
Maximum head Max Head: 42 H/M
Maximum suction Max suction: 8 / M
Temperature: -20 ° C to 130 ° C Temperature: -20 ° C to 130 ° C
Power power :1.5-15KW
Material Material: 304 /316L, 1.431/1.4404, ASME BPE 316L, 1.4435 NB2 Fe≤0.5%
Surface treatment: ≤ Ra0.8μm, ≤ Ra0.6μm, ≤ Ra0.4μm
Machine seal: single machine seal, double machine seal
Inlet/Outlet Connection: Thread, Clamp, Flange, Aseptic Flange
Certification: 3-A-02-10 (N.O.1579); MD/06/42-EC (N.O.70521616101-00); FDA 177.2600; USP CLASS-II; EG/VO1935/2004;

The STU series is a full-stainless steel positive displacement cam rotor pump designed according to the strict sanitary requirements of 3A-02-11 of the United States. It is very suitable for food processing, beverages, juices, dairy products, cosmetics, pharmaceutical industries, etc. The transport of low-viscosity materials can be carried out with solid particulate materials and applied to CIP, SIP systems. The pump has features not found in other volumetric pumps, such as low pulse, high pressure, rotary two-way reversible and flexible functional combinations.
Maximum flow Max.flow: 90m3 / h / 395 GPM
Maximum pressure Max.pressure: 15bar/220 Psi
Maximum temperature Max.Temperature: 150°C/302°F
Maximum speed Max.rev: 750 rpm
Material: 316L, 1.4404, ASME BPE 316L, 1.4435 NB2 Fe ≤ 0.5%
Surface treatment: ≤ Ra0.8μm, ≤ Ra0.6μm, ≤ Ra0.4μm
Certification : 3-A-02-11 No.1759; FDA 177.2600; CE-MD/06-42 No .705201402401-00

Twin-screw pump has self-priming ability and can transport various complex conditions such as solid particles, gas-liquid mixture, high viscosity, low viscosity and material transportation and extraction; it not only used for material extraction and Conveying, also applicable to CIP and SIP systems, can reduce pipeline, valve control, CIP dedicated pumps, Not only improve?efficiency, but also reduces costs. The pump also has the performance that other volumetric pumps do not have, such as no pulse phenomenon, no damage to particles, high pressure, speed range and large flow range.
Max flow: 110m3/h
Max Particles: 23mm
Max pressure: 20 bar
Speed range: 10-3500 R.P.M
Working temperature (Max Temperature): -40 ° C to 150 ° C
Surface treatment: Ra≤0.6μm; EP=Ra0.4μm
Material: 100% stainless steel, medium contact part 316L.
Certification: 3-A-02-11 No.1759; FDA 177.2600; CE-MD/06-42 No .705201402401-00

Twin-screw pump has self-priming ability and can transport various complex conditions such as solid particles, gas-liquid mixture, high viscosity, low viscosity and material transportation and extraction; it not only used for material extraction and Conveying, also applicable to CIP and SIP systems, can reduce pipeline, valve control, CIP dedicated pumps, Not only improve efficiency, but also reduces costs. The pump also has the performance that other volumetric pumps do not have, such as no pulse phenomenon, no damage to particles, high pressure, speed range and large flow range.
Max flow: 110m3/h
Max Particles: 23mm
Max pressure: 20 bar
Speed range: 10-3500 R.P.M
Working temperature (Max Temperature): -40 ° C to 150 ° C
Surface treatment: Ra≤0.6μm; EP=Ra0.4μm
Material: 100% stainless steel, medium contact part 316L.
Certification: 3-A-02-11 No.1759; FDA 177.2600; CE-MD/06-42 No .705201402401-00

Twin-screw pump has self-priming ability and can transport various complex conditions such as solid particles, gas-liquid mixture, high viscosity, low viscosity and material transportation and extraction; it not only used for material extraction and Conveying, also applicable to CIP and SIP systems, can reduce pipeline, valve control, CIP dedicated pumps, Not only improve efficiency, but also reduces costs. The pump also has the performance that other volumetric pumps do not have, such as no pulse phenomenon, no damage to particles, high pressure, speed range and large flow range.
Max flow: 110m3/h
Max Particles: 23mm
Max pressure: 20 bar
Speed range: 10-3500 R.P.M
Working temperature (Max Temperature): -40 ° C to 150 ° C
Surface treatment: Ra≤0.6μm; EP=Ra0.4μm
Material: 100% stainless steel, medium contact part 316L.
Certification: 3-A-02-11 No.1759; FDA 177.2600; CE-MD/06-42 No .705201402401-00

RX series flexible pump is a positive displacement pump with excellent self-priming performance, and its self-priming capacity can reach 5 meters. The efficiency of pumping viscous products almost reaches the effect of pumping water.

The sampling valve has a dead angle-free design and the end face connected to the container does not have a dead zone phenomenon.
◎ It is mainly used for sample collection of materials in tank equipment or pipelines. It can also be installed at the lowest point of tank equipment or pipelines to drain residual liquid.
◎Working principle: the handwheel rotates the valve stem clockwise together with the sealing ring. At this time, the valve is opened for sampling. The handwheel rotates the valve stem counterclockwise together with the sealing ring. The valve is closed.
◎Applicable temperature: -10 ° C to 130 ° C
◎ valve body material: AISI 304 AISI 316L
◎ Sealing material: PTFE
◎Connection method: clamp type, thread type, welding type, nut type

equipment systems. The butterfly valve has the characteristics that standard butterfly valve does not have, such as ultra-small torque, seal opening and closing does not produce excessive friction, long life, No seal powder shedding, ultra-short valve body, and adjustable pressure. The valve does not require professional tools to be disassembled, maintained, cleaned, safe, reliable, low cost, simple to operate, and can be interchanged manually, pneumatically, or electrically.

Specifications: 4''-10'', DN100-DN250
Connection method: clamp, welding, flange, bottom flange, DIN 3A INCH
Material: 316L/1.4404/1.4435
Seal: White SILCON (recommended) Gray FKM (selection)
Execution mode: manual, pneumatic, electric interchangeable
Surface treatment: Ra 0.6μm (recommended); Ra 0.4μm (selection)
External surface: matt (recommended) bright blasting electropolishing
Applicable: vacuum, high temperature 130 ° C, CIP cleaning, SIP sterilization, etc.

Lobe pump is available in a variety of configurations, TU series is standard configuration . STU series is all stainless steel. It is a positive displacement cam rotor pump designed according to the strict sanitary requirements of the US 3A-02-11. It is very suitable for transportation of various highly viscous and low-viscous materials such as food processing, beverages, juices, dairy products, cosmetics, the pharmaceutical industry can be carried out with solid particulate materials, also can be applied to CIP and SIP systems. The pump has features not found in other volumetric pumps, such as low pulse, high pressure, rotary two-way reversible and flexible functional combinations.

Maximum flow Max.flow: 90m3 / h / 395 GPM
Maximum pressure Max.pressure: 15bar/220 Psi
Maximum temperature Max.Temperature: 150°C/302°F
Maximum speed Max.rev: 750 rpm
Material: 316L, 1.4404, ASME BPE 316L, 1.4435 NB2 Fe ≤ 0.5%
Surface treatment: ≤ Ra0.8μm, ≤ Ra0.6μm, ≤ Ra0.4μm
Certification : 3-A-02-11 No.1759; FDA 177.2600; CE-MD/06-42 No .705201402401-00

DJ-FDT butterfly valve is mainly designed for powder, granule, capsule and other container equipment systems. The butterfly valve has the characteristics that standard butterfly valve does not have, such as ultra-small torque, seal open/close does not produce excessive friction, long life, No seal powder shedding, ultra-short valve body and adjustable pressure. The valve does not require professional tools to be disassembled, maintained, cleaned, safe, reliable, low cost, simple to operate and can be interchanged manually, pneumatically or electrically.
Specifications: 4''-10'', DN100-DN250
Connection method: clamp, weld, flange, bottom flange, DIN 3A INCH
Material: 316L/1.4404/1.4435
Seal: White SILICON (recommended) Gray FKM (selection)
Execution mode: manual, pneumatic, electric interchangeable
Surface treatment: Ra 0.6μm (recommended); Ra 0.4μm (selection)
External surface: matte (recommended) bright blasting electropolishing
Applicable: vacuum, high temperature 130 ° C, CIP cleaning, SIP sterilization, etc.

F-TOP-1671 is a rotary angular stroke pneumatic valve position feedback device designed for valve process position feedback. It is compatibled with most PLC (programmable logic controller) automation systems with digital communication or bus communication. (AS-I BUS). Including position feedback output, three-segment LED display, anti-leakage function, etc., used to control all types of process valves. It can be mounted on a variety of pneumatic valves, such as pneumatic butterfly valves, ball valves, globe valves and other rotary stroke valves.....
Feedback Output : PNP DC 24V & 4-20mA
Power supply : DC24V ± 10%
Bus communication : AS-I-BUS
Accuracy: Repeat positioning accuracy ≤ 0.2%;
Setting: One-button auto-tuning function
Leak prevention diagnostic function
Display: three-segment lamp color
Open: green / red
Close: red / green
Middle position: yellow (used for mixing proof valve )
Stroke angle: 0-180°

C-TOP-1881 is a straight-stroke pneumatic valve control unit designed for valve process control. It is compatibled with most PLC (programmable logic controller) automation systems with digital communication or bus communication (AS- I BUS). Including position feedback output, two-stage LED light display, anti-leak function, valve opening and closing control, etc., used to control all types of process valves. It can be mounted on a variety of pneumatic valves, such as pneumatic butterfly valves, ball valves, diaphragm valves, angle seat valves, globe valves, reversing valves, etc.…..
Control input: PNP DC 24V
Feedback Output : PNP DC 24V
Power supply : DC24V ± 10%
Bus communication : AS-I-BUS
Accuracy: Repeat positioning accuracy ≤ 0.2%;
Setting: One-button auto-tuning function
Operating mode: automatic & manual
Leak prevention diagnostic function
Display: two-segment lamp color
Open: green / red
Close: red / green
Travel range: 0-60mm/0-30mm

The PM series is a multifunctional material-liquid mixing pump with functions of mixing, shearing, emulsifying, homogenizing, differentiating, refining, crushing and material improvement. Compare with traditional production process, this pump is simpler, more convenient and economical, it can improve the production efficiency& improve the quality of the materials to be treated. Mainly used in food, beverages, dairy products, additives, personal care, biopharmaceuticals, thickeners, industrial applications.
The maximum processing capacity of powder: 9000KG/h
Maximum processing of thickeners: 3000KG/h (depending on material viscosity and concentration)
Maximum temperature: 130 ° C
Material: 304 /316L, 1.431/1.4404, ASME BPE 316L, 1.4435 NB2 Fe≤0.5%
Surface treatment : ≤ Ra0.8μm, ≤ Ra0.6μm, ≤ Ra0.4μm
Machine seal: single machine seal and double machine seal
Inlet/outlet connections: Thread, clamp, flange, sterile flange
Certification: 3-A-02-10 (N.O.1579); MD/06/42-EC (N.O.70521616101-00); FDA 177.2600; USP CLASS-II; EG/VO1935/2004;

The JZ3 series is an in-line continuous production emulsified homogenizing pump consisting of stator and rotor. The treated material will be dispersed, sheared, refined, crushed and emulsified step by step through total 12 layers of rotor and stator. Mixing, homogenizing, etc. Compared with the traditional production process, the pump is simpler, more convenient and optimized, it improve the production efficiency and quality of the material to be treated. Mainly used in various industrial fields such as food, beverage, pharmaceutical, health care, fine chemicals, coatings, pesticides, daily washing, photo paper, etc.
Maximum flow rate Max Flow rate: 50m3/h
Maximum power Max power :55KW
Maximum temperature Max temperature: -20 ° C to 140 ° C
Material refinement Media refinement: ≤ 100 GRIT (≈ 200μm) ≤100 mesh (approx. 200μm)
Material: 304 /316L, 1.431/1.4404, ASME BPE 316L, 1.4435 NB2 Fe≤0.5%
Surface treatment: ≤ Ra0.8μm, ≤ Ra0.6μm, ≤ Ra0.4μm
Machine seal: single seal and double seal
Inlet/Outlet Connection: Thread, Clamp, Flange, Aseptic Flange
Certification: 3-A-02-10 (N.O.1579); MD/06/42-EC (N.O.70521616101-00); FDA 177.2600; USP CLASS-II; EG/VO1935/2004;

The JZ1 series is an in-line continuous production emulsified homogenizing pump consisting of stator and rotor. The treated material will be dispersed, sheared, refined, crushed, emulsified and mixed through 6-10 layers of rotor and stator. , homogenization, etc. Compared with the traditional production process, the pump is simpler, more convenient and more optimized, it improves the production efficiency and quality of the material to be treated. Mainly used in food, beverage, pharmaceutical, health care, fine chemicals, coatings, pesticides, daily washing, paper and other industrial fields.
Maximum flow rate Max Flow rate: 50m3/h
Maximum power Max power :55KW
Maximum temperature Max temperature: -20 ° C to 140 ° C
Material refinement Media refinement: ≤ 60 GRIT (≈ 300μm) ≤60 mesh (about 300μm)
Material: 304 /316L, 1.431/1.4404, ASME BPE 316L, 1.4435 NB2 Fe≤0.5%
Surface treatment: ≤ Ra0.8μm, ≤ Ra0.6μm, ≤ Ra0.4μm
Machine seal: single seal and double seal
Inlet/Outlet Connection: Thread, Clamp, Flange, Aseptic Flange
Certification: 3-A-02-10 (N.O.1579); MD/06/42-EC (N.O.70521616101-00); FDA 177.2600; USP CLASS-II; EG/VO1935/2004;

The MLX series is a high-flow centrifugal pump with open impeller design. The hydraulic model is designed with CED to improve the over-flow performance of low-viscosity particulate materials and reduce the shear of materials under the premise of ensuring high-efficiency hydraulic performance. Cut and damage, the pump casing and liquid contact parts are all made of 304/316L stainless steel. It is mainly used for the transportation of solid particles and low-viscosity weak corrosive materials such as juice fermentation broth, wort and food and beverage juice jam. It can also be used for general industrial water or drinking water treatment.
Flow Flow: 100m3-1000m3
Head Head: 40 H/M
Temperature Temperature : -20 to 140 ° C
Power power :11kw-130KW
Material Material: 304 /316L, 1.431/1.4404, ASME BPE 316L, 1.4435 NB2 Fe≤0.5%
Surface treatment: ≤ Ra0.8μm, ≤ Ra0.6μm, ≤ Ra0.4μm
Machine seal: single machine seal (see configuration scheme);
Inlet/outlet connection: flange, sterile flange; Inlet/Outlet Connection : Flanged, Aseptic flanged
Certified: 3-A-02-10 (N.O.1579); MD/06/42-EC (N.O.70521616101-00); FDA 177.2600; USP CLASS-II; EG/VO1935/2004;

The DLX series centrifugal pump is?multi-stage impeller centrifugal pump with a high clean, high efficiency, high lift and economical delivery pump. The highest lift is up to 280 m (28 bar) and the conveying medium is soft and hygienic. Mainly used in?bio-pharmaceutical, food and beverage, wine, water treatment, fine chemicals and other industrial fields.
Maximum flow Max Flow: 50m3/h
Maximum head Max Head: 280 H/M
Maximum temperature Max Temperature :-10°C-140°C
Material Material: 304 /316L, 1.431/1.4404, ASME BPE 316L, 1.4435 NB2 Fe≤0.5%
Surface treatment: ≤ Ra0.8μm, ≤ Ra0.6μm, ≤ Ra0.4μm
Machine seal: single seal, double seal?
Inlet/Outlet Connection: Thread, Clamp, Flange, Aseptic Flange
Certified: 3-A-02-10 (N.O.1579); MD/06/42-EC (N.O.70521616101-00); FDA 177.2600; USP CLASS-II; EG/VO1935/2004;

The DJ-CLX series of centrifugal pumps not only optimize the internal structure, impeller design, dead angle treatment, machine seal pressure balance design and the machine seal is completely in the flushing area. We also optimized the external hygiene of the pump to make it absolutely hygienic and reduce the dead angle inside. Because there is no dead zone, it is very easy to be cleaned by CIP, SIP sterilization?so on. In addition, we have the largest flexibility combination for the DJ-CLX series of pumps. For example, the pump outlet angle can be adjusted from 0° to 360°. The pump cover is clamp connection,?so?the pump can be maintained easily . The replacement of the seals maintains high efficiency and reduces the high degree of professionalism of the personnel,?no special tools are required to complete these. Therefore, the goal of achieving high efficiency, hygiene, high reliability and low cost has made the DJ-CLX series centrifugal pump into a high-performance pump.
Maximum flow rate Max Flow rate: 120m3/h
Head Head: 70 H/M
Temperature Temperature : -20 ° C to 140 ° C
Power Power : 1.1KW-30KW
Material Material: 304 /316L, 1.4301/1.4404, ASME BPE 316L, 1.4435 BN2 Fe≤0.5%
Surface treatment: ≤ Ra0.8μm, ≤ Ra0.6μm, ≤ Ra0.4μm Mechanical seal: single machine seal, double machine seal Inlet/Outlet Connection: thread, clamp, flange, aseptic method Certification: 3-A-02-10 (NO1579); MD/06/42-EC (NO70521616101-00); FDA 177.2600; USP CLASS-II; EG/VO1935/2004

The DJ-SCLX series is an all-stainless steel centrifugal pump that contains stainless steel motor . Not only optimizes the internal structure, impeller design, dead angle treatment, machine seal pressure balance design and the machine seal is completely in the flushing area. We also optimized the external hygiene of the pump to make it absolutely hygienic and reduce the dead angle inside. Because there is no dead zone, it is very easy to be cleaned by CIP, SIP sterilization ,etc. In addition, we have the largest flexibility combination for the DJ-SCLX series of pumps. For example, the pump outlet angle can be adjusted from 0° to 360°. The pump cover is clamp connection, so that the pump can be maintained easily. The replacement of the seals maintains high efficiency and reduces the high professionalism of the personnel, it do not require special tools. The DJ-SCLX series centrifugal pump has become a high-performance pump due to its high efficiency, hygienic, high reliability and low cost.

● Intelligent valve positioner, which is mainly used in the fluid process control system, achieves valve flow adjustment control.
● The controller can be fitted to variety of pneumatic valves, for example, diaphragm valve, divert seat valve, angle seat valve, butterfly valve, ball valve and other valves.
● 0/4 ... 20mA to 0 ... 5 / 10V signal input (standard)
● 0/4 ... 20mA to 0 ... 5 / 10V position feedback output (option)
● Mod bus (RS485)control (option)
● Device NET bus control (option)
● Single-acting?/ double acting?(option)
● Linear actuator / rotary actuator (option)
● Power: DC.24V
● Air pressure: 5.0-7.0Bar
● Protect class: IP68

The RX series of flexible vane pumps are volumetric pumps with excellent self-priming performance and have self-priming capacity up to 5 meters. The viscous product delivers almost the same efficiency as pumping, so it is very versatile, suction treatment is very smooth and soft, never whipping or damaging the product, even fragile products like high fat cream. Large berries, even like half of peach can be pumped without damage, the pump run completely pulsating. It can also be used as a dosing pump by adjusting the pump speed.
Max flow: 20m3/h
Max pressure: 4 bar
Max suction: 5 M
Max Temperature: 80℃
Rotating speed：1450 R.P.M
Material：316L/1.4404
Surface treatment：Ra≤0.6μm；EP=Ra0.4μm
Certification：3-A-02-11 No.1759；FDA 177.2600 ； CE-MD/06-42 No.705201616101-00

Specifications: 1"-6",DN10-DN150
Material：ASTM304/316L,1.4301/1.4404
Inner surface：Ra0.8μm，mechanical polishing and Electro polishing
outer surface：Ra0.8μm，mechanical polishing
Standards：DIN11851、RJT、SMS、DS、ISO、IDF,etc
Authentication：3-A-63-03；EN 10204-3.1 Certificate